InHealth Technologies

Basic Information

• Brand Name: InHealth Technologies
• Primary DI: 00848253002873
• Version / Model: PK 2004F-R2
• Company Name: Freudenberg Medical, LLC
• Labeler DUNS: 120981337
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2016-09-24
• Public Version: 3
• Public Version Date: 2021-03-10
• Public Version Status: Update
• Public Device Record Key: 933bc9d6-87c3-49a1-9e93-305e012bc470

Device Characteristics

• Single Use: Yes
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: Yes
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: No
• PM Exempt: No
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: No
• Has Expiration Date: Yes
• Has Donation ID: No

Sterilization

• Is Sterile: No
• Sterilization Prior Use: No

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
BYD	Condenser, Heat And Moisture (Artificial Nose)	Anesthesiology	868.5375	1
BTR	Tube, Tracheal (W/Wo Connector)	Anesthesiology	868.5730	2
BTO	Tube, Tracheostomy (W/Wo Connector)	Anesthesiology	868.5800	2
JOH	Tube Tracheostomy And Tube Cuff	Anesthesiology	868.5800	2

GMDN Terms

Code	Name	Definition	Implantable	Status
12292	Laryngectomy tube	A hollow device intended to maintain tracheostoma patency immediately after laryngectomy to provide an airway for the patient and to prevent tracheostomal stenosis (narrowing) in the months following the procedure. It is a soft plastic or silicone curved/contoured tube, similar to a tracheostomy tube, and may have an inner cannula and be fenestrated to allow simultaneous use with a tracheoesophageal speech valve. It is held in place with a strap or band around the neck and is typically regularly removed and reinserted by the patient. This is a reusable device.	No	Active
35530	Heat/moisture exchanger, single-use	A one-piece, canister-like device that connects in-line with a patient's artificial airway [e.g., an endotracheal (ET) tube], to capture the patient's exhaled heat and moisture so that they can be used to heat and humidify therapeutic gases inspired by the patient; it does not include a microbial filter. Commonly known as a heat & moisture exchanger (HME) or an "artificial nose", it is used when the patient is subjected to extended periods of breathing dry gases such as during anaesthesia or intensive care ventilation. This is a single-use device.	No	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	00848253002873	GS1

Customer Contacts

• Phone: [phone]
• Email: [email protected]