Stern Snap One Piece Abutment 3mm Cuff (A)

Basic Information

• Brand Name: Stern Snap One Piece Abutment 3mm Cuff (A)
• Primary DI: 00841549112461
• Version / Model: 904614
• Company Name: STERNGOLD DENTAL LLC
• Labeler DUNS: 124763728
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2017-05-22
• Public Version: 6
• Public Version Date: 2020-01-08
• Public Version Status: Update
• Public Device Record Key: c157489e-38f2-49eb-b4d3-c54d5da76888

Device Description

SternSnap Overdenture Implant Abutment System that can be used to retain overdentures on most popular implants. It features a low profile that takes up only 2.5mm of height in the denture and has a long-lasting plastic retention cap that comes in three retention levels (1 lb, 2lb and 3 lb) and doesn’t require a metal housing, making it a simpler, more economical option. Contents: 1 attachment, 1 each Yellow and Green retaining caps, 1 blockout spacer.

Device Characteristics

• Single Use: Yes
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: No
• PM Exempt: No
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: Yes
• Has Expiration Date: No
• Has Donation ID: No

Sterilization

• Is Sterile: No
• Sterilization Prior Use: Yes
• Sterilization Methods: Moist Heat or Steam Sterilization

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
NHA	Abutment, Implant, Dental, Endosseous	Dental	872.3630	2

GMDN Terms

Code	Name	Definition	Implantable	Status
44879	Dental implant suprastructure, permanent, preformed	A prefabricated device intended to provide a permanent intermediate fixture level between a dental implant and the final prosthesis/restoration (e.g., bridge, single tooth, overdenture). It includes one or more structural component(s) [e.g., abutment, ball, bar, bar overlay, coping, ring], and may be made of various materials [e.g., titanium (Ti), plastic, gold alloy]. It includes devices glued to prostheses and/or devices that can be replaced during cleaning cycles. An abutment screw(s) may be included, however the suprastructure does not represent the screw(s) in isolation. It may also be referred to as an abutment assembly or mesostructure.	Yes	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	00841549112461	GS1

Customer Contacts

• Phone: [phone]
• Email: [email protected]

Premarket Submissions

Submission Number	Supplement Number
K142407	000