Angled Abutment 15° 4.0mm Cuff

Basic Information

• Brand Name: Angled Abutment 15° 4.0mm Cuff
• Primary DI: 00841549110962
• Version / Model: 904318
• Company Name: STERNGOLD DENTAL LLC
• Labeler DUNS: 124763728
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2020-07-07
• Public Version: 1
• Public Version Date: 2020-07-15
• Public Version Status: New
• Public Device Record Key: 2c424803-563f-48ae-971e-d44a1758d10f

Device Description

Angled Abutment are available for cases where implants are not able to provide alignments leading to clinical parallelism. Available in 15 and 30 degree angulations, they offer the clinician a wide range of three-dimensional options. Their internal design allows them to be locked into any one of twelve rotational positions. The 15 degree Angled Abutments are designed for use with cemented prostheses, and the 30 degree Angled Abutments for cemented or screw retained prostheses.

Device Characteristics

• Single Use: Yes
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: No
• PM Exempt: No
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: Yes
• Has Expiration Date: No
• Has Donation ID: No

Sterilization

• Is Sterile: No
• Sterilization Prior Use: Yes
• Sterilization Methods: Moist Heat or Steam Sterilization

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
DZE	Implant, Endosseous, Root-Form	Dental	872.3640	2

GMDN Terms

Code	Name	Definition	Implantable	Status
44879	Dental implant suprastructure, permanent, preformed	A prefabricated device intended to provide a permanent intermediate fixture level between a dental implant and the final prosthesis/restoration (e.g., bridge, single tooth, overdenture). It includes one or more structural component(s) [e.g., abutment, ball, bar, bar overlay, coping, ring], and may be made of various materials [e.g., titanium (Ti), plastic, gold alloy]. It includes devices glued to prostheses and/or devices that can be replaced during cleaning cycles. An abutment screw(s) may be included, however the suprastructure does not represent the screw(s) in isolation. It may also be referred to as an abutment assembly or mesostructure.	Yes	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	00841549110962	GS1

Customer Contacts

• Phone: [phone]
• Email: [email protected]

Premarket Submissions

Submission Number	Supplement Number
K892124	000