RP Plastic Prosthetic Cylinder 4.0mm height

Basic Information

• Brand Name: RP Plastic Prosthetic Cylinder 4.0mm height
• Primary DI: 00841549110498
• Version / Model: 904146
• Company Name: STERNGOLD DENTAL LLC
• Labeler DUNS: 124763728
• Distribution Status: Not in Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2020-07-07
• Public Version: 2
• Public Version Date: 2023-10-09
• Public Version Status: Update
• Public Device Record Key: 64b2a4af-7783-4ac5-bceb-a79edb69e199
• Distribution End Date: 2023-10-06

Device Description

Gold Cylinder (64% Gold, 22% Palladium) provides precision fit to abutment. Melting Range 1320°C-1370°C (2400°F-2500°F). Used for Fabrication of Final Restoration. Plastic Cylinders are fabricated to assure clean burnout.

Device Characteristics

• Single Use: Yes
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: No
• PM Exempt: No
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: Yes
• Has Expiration Date: No
• Has Donation ID: No

Sterilization

• Is Sterile: No
• Sterilization Prior Use: Yes
• Sterilization Methods: Moist Heat or Steam Sterilization

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
DZE	Implant, Endosseous, Root-Form	Dental	872.3640	2

GMDN Terms

Code	Name	Definition	Implantable	Status
44879	Dental implant suprastructure, permanent, preformed	A prefabricated device intended to provide a permanent intermediate fixture level between a dental implant and the final prosthesis/restoration (e.g., bridge, single tooth, overdenture). It includes one or more structural component(s) [e.g., abutment, ball, bar, bar overlay, coping, ring], and may be made of various materials [e.g., titanium (Ti), plastic, gold alloy]. It includes devices glued to prostheses and/or devices that can be replaced during cleaning cycles. An abutment screw(s) may be included, however the suprastructure does not represent the screw(s) in isolation. It may also be referred to as an abutment assembly or mesostructure.	Yes	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	00841549110498	GS1

Customer Contacts

• Phone: [phone]
• Email: [email protected]

Premarket Submissions

Submission Number	Supplement Number
K892124	000