iNSitu™ Hip System

Basic Information

• Brand Name: iNSitu™ Hip System
• Primary DI: 00816127024344
• Version / Model: 10-95-3113
• Company Name: NEXTSTEP ARTHROPEDIX, LLC
• Labeler DUNS: 060211165
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2023-09-06
• Public Version: 2
• Public Version Date: 2023-10-04
• Public Version Status: Update
• Public Device Record Key: 41e080cf-68e2-45dd-b991-12e753148dc8

Device Description

Spring Loaded Calcar Planer

Device Characteristics

• Single Use: No
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: Yes
• PM Exempt: No
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: No
• Has Expiration Date: No
• Has Donation ID: No

Sterilization

• Is Sterile: No
• Sterilization Prior Use: Yes
• Sterilization Methods: Moist Heat or Steam Sterilization

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
LPH	Prosthesis, Hip, Semi-Constrained, Metal/Polymer, Porous Uncemented	Orthopedic	888.3358	2
LZO	Prosthesis, Hip, Semi-Constrained, Metal/Ceramic/Polymer, Cemented Or Non-Porous, Uncemented	Orthopedic	888.3353	2
OQG	Hip Prosthesis, Semi-Constrained, Cemented, Metal/Polymer, + Additive, Porous, Uncemented	Orthopedic	888.3358	2
OQI	Hip, Semi-Constrained, Cemented, Metal/Ceramic/Polymer + Additive, Porous Uncemented	Orthopedic	888.3353	2

GMDN Terms

Code	Name	Definition	Implantable	Status
45114	Bone-resection orthopaedic reamer, reusable	An orthopaedic surgical instrument intended to resect bone (cut out part of the bone), and in some cases hypertrophic tissue [e.g., ligamentum flavum], to: 1) accept a prosthetic implant, typically at or within a joint (e.g., condyle of knee, neck of humerus, olecranon of ulna); and/or 2) relieve pressure at or facilitate access to a joint. Commonly called a mill or a reamer, it is typically designed as a stainless steel cylindrical body with an end/circumferential cutting edge and is attached to a shaft for manual or powered rotation. This is a reusable device.	No	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	00816127024344	GS1

Customer Contacts

• Phone: [phone]
• Email: [email protected]