MotoBAND CP DynaFORCE™

Basic Information

• Brand Name: MotoBAND CP DynaFORCE™
• Primary DI: 00815432029259
• Version / Model: Temporary Fixation Pins 2.2mm
• Catalog Number: 7000-FP22
• Company Name: CROSSROADS EXTREMITY SYSTEMS
• Labeler DUNS: 058864308
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2021-06-03
• Public Version: 2
• Public Version Date: 2023-09-18
• Public Version Status: Update
• Public Device Record Key: 0362299a-dedd-477e-a040-8d4a0f8f2227

Device Description

The MotoBAND® CP Implant System is indicated for stabilization and fixation of fresh fractures, revision procedures, joint fusion and reconstruction of small bones of the hand, feet, wrist, ankles, fingers and toes. When used for these indications, the MotoBAND® CP Implant System with the exception of the 2-hole plate may be used with the MotoCLIP®/HiMAX® Implant System.

Device Characteristics

• Single Use: Yes
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: Yes
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: No
• PM Exempt: Yes
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: No
• Has Expiration Date: Yes
• Has Donation ID: No

Sterilization

• Is Sterile: Yes
• Sterilization Prior Use: No

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
LXH	Orthopedic Manual Surgical Instrument	Orthopedic	888.4540	1

GMDN Terms

Code	Name	Definition	Implantable	Status
32854	Orthopaedic bone pin, non-bioabsorbable	A thin, implantable rod intended to be used for the stabilization of a bone fracture or bone grafts, or for an osteotomy or arthrodesis. It is typically drilled into bone and may be smooth or threaded, solid or cannulated, and/or semi-flexible. Also known as a K-Wire, it may in addition be intended to assist with the introduction of a surgical instrument and/or implant; it is not intended for implantation into the intramedullary canal (i.e., not a nail). It is made of a material that is not chemically degraded or absorbed by natural body processes (e.g., stainless steel). Some designs may have a break-off shank and/or be coated to improve long-term fixation. This is a single-use device.	Yes	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	00815432029259	GS1

Customer Contacts

• Phone: [phone]
• Email: [email protected]