CrossRoads™ Screw

Basic Information

• Brand Name: CrossRoads™ Screw
• Primary DI: 00815432028979
• Version / Model: 7.0 Headless Implant Prep Kit
• Catalog Number: 1456-7071
• Company Name: CROSSROADS EXTREMITY SYSTEMS
• Labeler DUNS: 058864308
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2020-09-10
• Public Version: 4
• Public Version Date: 2024-02-19
• Public Version Status: Update
• Public Device Record Key: 6a863875-1143-4870-900a-a0fe8d7b383e

Device Description

The CrossRoads™ Screw System is indicated for fracture repair and fixation, osteotomy, joint fusion, reconstruction and arthrodesis of bones appropriate for the size of the device.

Device Characteristics

• Single Use: Yes
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: Yes
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: No
• PM Exempt: No
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: No
• Has Expiration Date: Yes
• Has Donation ID: No

Sterilization

• Is Sterile: Yes
• Sterilization Prior Use: No

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
HWC	Screw, Fixation, Bone	Orthopedic	888.3040	2

GMDN Terms

Code	Name	Definition	Implantable	Status
58796	Surgical depth gauge, single-use	A surgical instrument designed to measure the depth of a recess, usually to measure the depth of holes being drilled in bone to determine the length of the bone screw to be used. It may take the form of: 1) a device with a moveable (sliding) centrepiece (a prong), the tip of which is inserted into the recess to read from a scale; 2) a circular disc with a central hole which is clipped to a drill bit so that the device slides up as the drill bit is advanced; or 3) a cylindrical rod with markings. This is a single-use device.	No	Active
58776	Surgical screwdriver, single-use	A non-powered tool that fits into a screw head in order to apply rotation to tighten/loosen/remove a screw during a surgical procedure. It typically has a high-grade stainless steel shaft with a distal end dedicated to fit into a screw head that may be slotted, Phillips (cross head), Pozidriv (Supadriv), Torx, Hex (Allen), Robertson (square), spanner head (twin pins), Polydrive, or one-way (clutch). The proximal end of the shaft may have a handle for manual use, or it may have a profiled tang that fits into an interchangeable screwdriver handle, a manually-operated chuck, or a power driver. This is a single-use device.	No	Active
43390	Fluted surgical drill bit, single-use	A shaft of metal with an obtuse, V-shaped cutting edge designed to be rotated to bore into bone to create a hole of the same dimension as the diameter of the shaft. This device, commonly called a "twist drill", has a cylindrical design with a double-edged cutting head that is formed from two spiralled flutes that extend the length of the insertion part of the drill. At the proximal end, it is mounted into a surgical power tool or a surgical hand drill/brace. This is a single-use device.	No	Active
35685	Orthopaedic bone wire	A wire intended for the fixation of bone fractures that may be implanted or used short-term (e.g., to hold a plate in the correct position during an intervention). It may be used: 1) as a cerclage wire to aid bone fixation; 2) in a loop or figure-of-eight configuration to reattach, e.g., the tip of the elbow (olecranon), tibial tubercle, or greater trochanter; 3) to augment bone screw/plate fixation; or 4) as a Kirschner wire or K-Wire to stiffen (arthrodese) a toe or finger. It is made of metal [e.g., stainless steel, cobalt-chrome (Co-Cr)], and may be malleable or rigid; some types include a nut designed to be attached to the wire to prevent wire migration. This is a single-use device.	No	Obsolete
47829	Surgical instrument handle, non-torque-limiting	A hand-held manual surgical instrument designed to attach to the proximal end of a surgical instrument (e.g., a screwdriver shaft) to allow the surgeon to perform manipulations with the instrument, such as manual rotation of a bone screw or reamer; it does not include a torque-limiting function. The device is typically made of metal and/or synthetic material and may have a straight or T-shaped handle grip which may include additional features such as a ratchet mechanism to allow the surgeon to maintain a constant hold on the handle when providing rotation in one direction. This is a reusable device.	No	Active
47634	Surgical countersink, single-use	A rotary surgical instrument designed to enlarge the diameter of the proximal portion of a hole drilled in bone. It is a shaft of metal with a cutting head, available in various configurations, that is rotated at low speeds typically by a drilling system. The device is typically used to recess the head of a screw/bolt within bone (enable it to lie flush with or below the bone surface) or to help accommodate the implantation of a device in bone. This is a single-use device intended to be sterilized prior to use.	No	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	00815432028979	GS1

Customer Contacts

• Phone: [phone]
• Email: [email protected]