FDA UDI
In Commercial Distribution
🇺🇸 United States
MotoBAND CP DynaFORCE™
DI: 00815432028320
·
Model: Compressor Block Size 1
·
CROSSROADS EXTREMITY SYSTEMS
Product Codes
1
GMDN Terms
1
Identifiers
1
Pkg Device Count
1
Basic Information
- Brand Name
- MotoBAND CP DynaFORCE™
- Primary DI
- 00815432028320
- Version / Model
- Compressor Block Size 1
- Catalog Number
- 280284
- Company Name
- CROSSROADS EXTREMITY SYSTEMS
- Labeler DUNS
- 058864308
- Distribution Status
- In Commercial Distribution
- Device Count in Pkg
- 1
- Record Status
- Published
- Publish Date
- 2020-10-22
- Public Version
- 3
- Public Version Date
- 2023-10-04
- Public Version Status
- Update
- Public Device Record Key
- a684f230-e622-407f-a4e8-381dd0dd6bc4
Device Description
The MotoBAND® CP Implant System is indicated for stabilization and fixation of fresh fractures, revision procedures, joint fusion and reconstruction of small bones of the hand, feet, wrist, ankles, fingers and toes. When used for these indications, the MotoBAND® CP Implant System with the exception of the 2-hole plate may be used with the MotoCLIP®/HiMAX® Implant System.
Device Characteristics
- Single Use
- No
- Prescription Use (Rx)
- Yes
- Over the Counter (OTC)
- No
- Kit
- No
- Combination Product
- No
- HCT/P
- No
- Contains NRL
- No
- Not Made with NRL
- No
- MRI Safety
- Labeling does not contain MRI Safety Information
- Direct Marking Exempt
- No
- PM Exempt
- Yes
- Has Serial Number
- No
- Has Lot/Batch Number
- Yes
- Has Manufacturing Date
- No
- Has Expiration Date
- No
- Has Donation ID
- No
Sterilization
- Is Sterile
- No
- Sterilization Prior Use
- Yes
- Sterilization Methods
- Moist Heat or Steam Sterilization
Product Codes
| Code | Name | Medical Specialty | Regulation # | Device Class |
|---|---|---|---|---|
| LXH | Orthopedic Manual Surgical Instrument | Orthopedic | 888.4540 | 1 |
GMDN Terms
| Code | Name | Definition | Implantable | Status |
|---|---|---|---|---|
| 61807 | Bone-resection orthopaedic reamer, single-use | An orthopaedic surgical instrument intended to resect bone (cut out part of the bone), and in some cases hypertrophic tissue [e.g., ligamentum flavum], to: 1) accept a prosthetic implant, typically at or within a joint (e.g., condyle of knee, neck of humerus, olecranon of ulna); and/or 2) relieve pressure at or facilitate access to a joint. Commonly called a mill or a reamer, it is typically designed as a stainless steel cylindrical body with an end/circumferential cutting edge and is attached to a shaft for manual or powered rotation. This is a single-use device. | No | Active |
Identifiers
| Type | ID | Issuing Agency | Package Type | Qty per Pkg | Pkg Status | Pkg Discontinue Date |
|---|---|---|---|---|---|---|
| Primary | 00815432028320 | GS1 |