STRoPP

Basic Information

• Brand Name: STRoPP
• Primary DI: 00815432023783
• Version / Model: STRoPP Plantar Plate Repair Kit - Sterile
• Catalog Number: 1601-0002
• Company Name: CROSSROADS EXTREMITY SYSTEMS
• Labeler DUNS: 058864308
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2017-05-05
• Public Version: 14
• Public Version Date: 2024-02-19
• Public Version Status: Update
• Public Device Record Key: 8e7df9f4-f642-49fe-a5f9-2cb79173fb86

Device Description

The STROPP (Single Tunnel Repair of Plantar Plate) System is a sterile packaged kit that include PEEK implants and related instruments for plantar plate repair. Implants are packaged with the following manual surgical instruments for general use: a needle, needle passer, suture passer, an inserter, K-wires and distractor. The implants are compatible with Size 0 suture; suture is not included with the system. The STROPP System is intended for use with a suture in metatarsal ligament and tendon repairs.

Device Characteristics

• Single Use: Yes
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: Yes
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: No
• PM Exempt: No
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: No
• Has Expiration Date: Yes
• Has Donation ID: No

Sterilization

• Is Sterile: Yes
• Sterilization Prior Use: No

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
MBI	Fastener, Fixation, Nondegradable, Soft Tissue	Orthopedic	888.3040	2

GMDN Terms

Code	Name	Definition	Implantable	Status
61143	Suturing needle, single-use	A cylindrical-shaped, solid, metal instrument intended to be used to insert and pull suture material through tissue (e.g., skin, fascia, serous, vascular, or other tissue/organ) during surgical stitching of tissues. It is available in various lengths, curvatures, diameters, cross-sectional shapes, and distal end forms. This is a single-use device.	No	Active
57874	Suturing unit, single-use	A non-powered, hand-held device intended to pass sutures or a needle/suture assembly through tissues/prosthetic materials to facilitate suturing during an endoscopic and/or open surgical procedure; it may also knot, cut and/or tighten the sutures/ligature loop during or after placement. It typically consists of a shaft with hooks, catches, clasps, or forceps-like jaws at the distal end, and a proximal handle with controls. It typically has a pointed/cutting component to create a suture tunnel, and is loaded with the sutures or the suture is inserted through the shaft. This is a single-use device.	No	Active
35685	Orthopaedic bone wire	A wire intended for the fixation of bone fractures that may be implanted or used short-term (e.g., to hold a plate in the correct position during an intervention). It may be used: 1) as a cerclage wire to aid bone fixation; 2) in a loop or figure-of-eight configuration to reattach, e.g., the tip of the elbow (olecranon), tibial tubercle, or greater trochanter; 3) to augment bone screw/plate fixation; or 4) as a Kirschner wire or K-Wire to stiffen (arthrodese) a toe or finger. It is made of metal [e.g., stainless steel, cobalt-chrome (Co-Cr)], and may be malleable or rigid; some types include a nut designed to be attached to the wire to prevent wire migration. This is a single-use device.	No	Obsolete
61807	Bone-resection orthopaedic reamer, single-use	An orthopaedic surgical instrument intended to resect bone (cut out part of the bone), and in some cases hypertrophic tissue [e.g., ligamentum flavum], to: 1) accept a prosthetic implant, typically at or within a joint (e.g., condyle of knee, neck of humerus, olecranon of ulna); and/or 2) relieve pressure at or facilitate access to a joint. Commonly called a mill or a reamer, it is typically designed as a stainless steel cylindrical body with an end/circumferential cutting edge and is attached to a shaft for manual or powered rotation. This is a single-use device.	No	Active
61806	Bone-resection orthopaedic reamer, reprocessed	An orthopaedic surgical instrument designed to resect bone (cut out part of the bone) and precisely shape a specific area of bone as it is advanced for the acceptance of a prosthetic implant, typically at or within a joint (e.g., condyle of knee, neck of humerus, olecranon of ulna). Commonly called a mill or a reamer it is typically designed as either a preshaped or a solid cylindrical body with an end/circumferential cutting edge, and is attached to a shaft for manual or powered rotation. It is typically made of a high-grade stainless steel alloy available in varying sizes. This is a previously used single-use device that has been processed for an additional single-use patient application.	No	Active
45062	Tendon/ligament bone anchor, non-bioabsorbable	A non-bioabsorbable device designed to be implanted into bone for the attachment of tendons/ligaments/soft tissues either directly or via a suture attached to the device; typically used in arthroscopic or open surgical procedures. This device is available in various designs and sizes and is made of a material that cannot be chemically degraded or absorbed via natural body processes [e.g., titanium (Ti)].	Yes	Active
47568	Suturing needle holder, single-use	A hand-held manual surgical instrument designed to grasp a suture needle when pushing/pulling the needle and attached suture through tissue during suturing. It has short serrated jaws at the distal end to provide better grip of the needle, and is available in a wide variety of sizes and designs, such as: 1) a self-retaining, scissors-like design with ring handles at the proximal end; 2) a tweezers-like design with bowed, hinged handles that are operated by squeezing them together; and 3) a heavy-duty pincer-like design. This is a single-use device.	No	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	00815432023783	GS1

Customer Contacts

• Phone: [phone]
• Email: [email protected]

Device Sizes

Type	Value	Unit	Text
Device Size Text, specify			3.0mm Diameter x 8.0mm Length