Thermoplastic Mask

Basic Information

• Brand Name: Thermoplastic Mask
• Primary DI: 00815212022609
• Version / Model: MK8045
• Company Name: Izi Medical Products, LLC
• Labeler DUNS: 933506164
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2017-01-25
• Public Version: 3
• Public Version Date: 2018-07-06
• Public Version Status: Update
• Public Device Record Key: c09279d8-da24-4973-a004-cea336733dd5

Device Characteristics

• Single Use: Yes
• Prescription Use (Rx): No
• Over the Counter (OTC): No
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: No
• PM Exempt: No
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: No
• Has Expiration Date: No
• Has Donation ID: No

Sterilization

• Is Sterile: No
• Sterilization Prior Use: No

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
IYE	Accelerator, Linear, Medical	Radiology	892.5050	2

GMDN Terms

Code	Name	Definition	Implantable	Status
40896	Patient positioning thermoplastic mould material	A thermoplastic material used to create moulds of a patient's body. It is commonly supplied as sheets or meshes of thermoplastic material that have been coated with polyurethane for ease of handling and positioning. Most of these materials are softened by heating in hot water and while softened, are moulded around the patient's anatomy. When cooled, it hardens to form a custom-made mould or cast of that part of the body. After the moulding process is complete, it is typically attached to a board, frame, or another patient positioning system (PPS) or immobilization device. After application, this device cannot be reused (i.e., remoulded).	No	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	00815212022609	GS1

Premarket Submissions

Submission Number	Supplement Number
K022708	000