Boundary

Basic Information

• Brand Name: Boundary
• Primary DI: 00814008025565
• Version / Model: BUT-1000T-TAP
• Company Name: NVISION BIOMEDICAL TECHNOLOGIES, INC.
• Labeler DUNS: 047486041
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2018-07-11
• Public Version: 3
• Public Version Date: 2020-01-20
• Public Version Status: Update
• Public Device Record Key: 708067dc-bada-4469-8ebf-53745a95ccfb

Device Description

Instrument, Lumbar Buttress Plate Tap. The Boundary Anterior Lumbar Buttress Plate is intended to stabilize the allograft or autograft at one level (L1-S1) as an aid to spinal fusion and to provide temporary stabilization and augment development of a solid spinal fusion. It may be used alone or with other anterior, anterolateral, or posterior spinal systems made of compatible materials. This device is not intended for load bearing applications.

Device Characteristics

• Single Use: No
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: No
• PM Exempt: No
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: No
• Has Expiration Date: No
• Has Donation ID: No

Sterilization

• Is Sterile: No
• Sterilization Prior Use: Yes
• Sterilization Methods: Moist Heat or Steam Sterilization

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
KWQ	Appliance, Fixation, Spinal Intervertebral Body	Orthopedic	888.3060	2

GMDN Terms

Code	Name	Definition	Implantable	Status
43084	Intervertebral-body internal spinal fixation system	A group of sterile implantable devices designed to apply force to a series of vertebrae to correct scoliosis (lateral curvature of the spine) or other spinal conditions. The system components are typically made of medical grade titanium and consists of various vertebral plates that are punched into each of a series of vertebral bodies. An eye-type screw is inserted in a hole in the centre of each plate, and a braided cable is threaded through each eye-type screw. The cable is tightened with a tension device and is fastened or crimped at each eye-type screw.	Yes	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	00814008025565	GS1

Customer Contacts

• Phone: [phone]
• Email: [email protected]

Premarket Submissions

Submission Number	Supplement Number
K173091	000

Storage Conditions

• Type: Special Storage Condition, Specify
• Special Conditions: A complete case with devices and instruments should not exceed 25 lbs and cases should not be stacked at any time