FDA UDI
In Commercial Distribution
🇺🇸 United States
TriLeap Lower Extremity Anatomic Plating System
DI: 00810112592344
·
Model: 16MM Cannulated Cup Reamer
·
CROSSROADS EXTREMITY SYSTEMS
Product Codes
1
GMDN Terms
1
Identifiers
1
Pkg Device Count
1
Basic Information
- Brand Name
- TriLeap Lower Extremity Anatomic Plating System
- Primary DI
- 00810112592344
- Version / Model
- 16MM Cannulated Cup Reamer
- Catalog Number
- 03.900.383
- Company Name
- CROSSROADS EXTREMITY SYSTEMS
- Labeler DUNS
- 058864308
- Distribution Status
- In Commercial Distribution
- Device Count in Pkg
- 1
- Record Status
- Published
- Publish Date
- 2024-02-23
- Public Version
- 1
- Public Version Date
- 2024-03-04
- Public Version Status
- New
- Public Device Record Key
- 8469392d-c9c2-4d62-87fe-3276173536f5
Device Description
16MM Cannulated Cup Reamer
Device Characteristics
- Single Use
- No
- Prescription Use (Rx)
- Yes
- Over the Counter (OTC)
- No
- Kit
- No
- Combination Product
- No
- HCT/P
- No
- Contains NRL
- No
- Not Made with NRL
- No
- MRI Safety
- Labeling does not contain MRI Safety Information
- Direct Marking Exempt
- No
- PM Exempt
- Yes
- Has Serial Number
- No
- Has Lot/Batch Number
- Yes
- Has Manufacturing Date
- No
- Has Expiration Date
- No
- Has Donation ID
- No
Sterilization
- Is Sterile
- No
- Sterilization Prior Use
- Yes
- Sterilization Methods
- Moist Heat or Steam Sterilization
Product Codes
| Code | Name | Medical Specialty | Regulation # | Device Class |
|---|---|---|---|---|
| HTO | Reamer | Orthopedic | 888.4540 | 1 |
GMDN Terms
| Code | Name | Definition | Implantable | Status |
|---|---|---|---|---|
| 45114 | Bone-resection orthopaedic reamer, reusable | An orthopaedic surgical instrument intended to resect bone (cut out part of the bone), and in some cases hypertrophic tissue [e.g., ligamentum flavum], to: 1) accept a prosthetic implant, typically at or within a joint (e.g., condyle of knee, neck of humerus, olecranon of ulna); and/or 2) relieve pressure at or facilitate access to a joint. Commonly called a mill or a reamer, it is typically designed as a stainless steel cylindrical body with an end/circumferential cutting edge and is attached to a shaft for manual or powered rotation. This is a reusable device. | No | Active |
Identifiers
| Type | ID | Issuing Agency | Package Type | Qty per Pkg | Pkg Status | Pkg Discontinue Date |
|---|---|---|---|---|---|---|
| Primary | 00810112592344 | GS1 |