Nanoplasty System

Basic Information

• Brand Name: Nanoplasty System
• Primary DI: 00810111222891
• Version / Model: 02-00202
• Company Name: Treace Medical Concepts, Inc.
• Labeler DUNS: 054808082
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2024-10-18
• Public Version: 3
• Public Version Date: 2025-11-20
• Public Version Status: Update
• Public Device Record Key: d7a951c7-14d9-48dd-ac9a-5dfaa7d5b683

Device Description

Drill Guide

Device Characteristics

• Single Use: No
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: Yes
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: No
• PM Exempt: No
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: No
• Has Expiration Date: No
• Has Donation ID: No

Sterilization

• Is Sterile: No
• Sterilization Prior Use: Yes
• Sterilization Methods: Moist Heat or Steam Sterilization

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
HRS	Plate, Fixation, Bone	Orthopedic	888.3030	2
HWC	Screw, Fixation, Bone	Orthopedic	888.3040	2

GMDN Terms

Code	Name	Definition	Implantable	Status
35095	Surgical drill guide, reusable	A manual surgical device designed to simultaneously place, angle, and guide a rotating surgical drill on hard tissue (e.g., bone); some types are also intended for guiding bone-coring instruments (e.g., keel punch). It is designed in a tubular form or with guiding holes and may have serrations at its distal end to enable firm placement on hard tissue surfaces (it is not bored into the tissue); it can have a handle or be held by another device (e.g., orthopaedic jig), and typically allows protection of the surrounding soft tissue during surgery. It is typically made of metal and may have graduations along its length; it is not custom-made for a specific patient. This is a reusable device.	No	Active
46647	Orthopaedic fixation plate, non-bioabsorbable	A non-bioabsorbable, non-customized, firm, implantable sheet intended to stabilize a fractured orthopaedic bone (excluding craniofacial and spinal) to treat a traumatic/pathological fracture, to fuse a joint (arthrodesis) and/or as part of an osteotomy. Typically attached to a bone of a limb, rib, sternum, or pelvis, it is designed to be fixed in place with screws, and may be used in connection with another fixation plate; it does not incorporate a sleeve or blade. Disposable instruments intended to facilitate implantation, or fixation implants (i.e., bone screws), may be packaged with the plate.	Yes	Active
66947	Orthopaedic bone screw (non-sliding)	A small, threaded, non-bioabsorbable, implantable rod intended for internal orthopaedic fixation by being screwed into a limb bone, rib, the sternum and/or pelvis to hold a plate, nail, rod or prosthesis to the bone, or to provide direct interfragmentary stabilization of a fractured bone; it is not intended to be introduced through the sleeve of a femoral neck fixation plate/sleeve, not used in dentistry/orthodontics, craniofacial or spinal bones, and not dedicated to intramedullary fixation/arthrodesis. It is typically of cortical or cancellous design and has a drive (e.g., slot, cross, star, polygonal) at its proximal end for introduction with a screwdriver.	Yes	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	00810111222891	GS1