(HEALTH & SAFETY INSTITUDE) HSI CPR ISO-SHIELD (Made in USA) with key ring case

Basic Information

• Brand Name: (HEALTH & SAFETY INSTITUDE) HSI CPR ISO-SHIELD (Made in USA) with key ring case
• Primary DI: 00634376495506
• Version / Model: Model 9550
• Catalog Number: MKIS 9550
• Company Name: RONDEX PRODUCTS, INCORPORATED
• Labeler DUNS: 021435706
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2023-05-12
• Public Version: 1
• Public Version Date: 2023-05-22
• Public Version Status: New
• Public Device Record Key: 71ad52fe-dacc-477d-a403-d0caef1ed0c8

Device Description

The Rondex CPR ISO-SHIELD is a mouth-to-mask barrier device used to help a rescuer avoid direct contact with the patient when doing resuscitation. Large barrier surface area, 7" X 7" (17.5 cm X 17.5 cm), maximizes isolation between rescuer and patient. The barrier material is attached to a short bite block containing TWO (2) silicone valves which helps to isolate the patient's breath from the rescuer. The bite block helps to keep the barrier positioned correctly while keeping the patient's mouth open. This makes ventilations much easier when doing the head tilt/chin lift procedure. The short bite block, 2 cm in length reduces the risk of pushing the patient's tongue back and does not require a prescription Two grips extend away from the bite block to provide a means to help the rescuer hold the small bite bloc and also help release the barrier from the patient's face between resuscitation breaths. This device is for emergency use only and should only be used by persons properly trained in CPR and in the use of this device. ISO-SHIELD (TM) of Rondex Products, Inc. MADE IN USA

Device Characteristics

• Single Use: Yes
• Prescription Use (Rx): No
• Over the Counter (OTC): Yes
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: No
• PM Exempt: No
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: No
• Has Expiration Date: No
• Has Donation ID: No

Sterilization

• Is Sterile: No
• Sterilization Prior Use: No

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
CBP	Valve, Non-Rebreathing	Anesthesiology	868.5870	2

GMDN Terms

Code	Name	Definition	Implantable	Status
61326	Cardiopulmonary resuscitation mask, single-use	A flexible, form-shaped device that is placed over a patient's mouth to administer "mouth-to-mask" exhaled air from the user to the patient during cardiopulmonary resuscitation (CPR). The device is designed to replace "mouth-to-mouth" resuscitation therefore reducing the risk of cross-contamination; it is also used on manikins by students during CPR training. The device typically consists of the mask with a mouthpiece and a non-rebreathing valve and/or bacteria filter. Also referred to as a pocket face mask, it is typically used by emergency medical services (EMS) or as part of first aid kits. This is a single-use device.	No	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	00634376495506	GS1

Customer Contacts

• Phone: [phone]
• Email: [email protected]

Premarket Submissions

Submission Number	Supplement Number
K942671	000

Storage Conditions

• Type: Handling Environment Temperature
• Temperature Range: -40 – 122 Degrees Fahrenheit