BEUDAMED
    FDA Recall Open, Classified

    Acumed Hexalob Screw various sizes: REF Numbers: : 3070-27008 2.7mm x 8mm NL Hexalobe Screw; 3070-27009 2.7mm x 9mm NL Hexalobe Screw; 3070-27010 2.7mm x 10mm NL Hexalobe Screw; 3070-27011 2.7mm x 11mm NL Hexalobe Screw; 3070-27012 2.7mm x 12mm NL Hexalobe Screw; 3070-27013 2.7mm x 13mm NL Hexalobe Screw; 3070-27014 2.7mm x 14mm NL Hexalobe Screw; 3070-27015 2.7mm x 15mm NL Hexalobe Screw; 3070-27016 2.7mm x 16mm NL Hexalobe Screw; 3070-27017 2.7mm x 17mm NL Hexalobe Screw; 3070-27018 2.7mm x 18mm NL Hexalobe Screw; 3076-30010 3.0mm x 10mm NL Hexalobe Screw; 3076-30012 3.0mm x 12mm NL Hexalobe Screw; 3076-30014 3.0mm x 14mm NL Hexalobe Screw

    Recall: Z-2532-2026 · Initiated May 28, 2026

    Recall

    Recall Number
    Z-2532-2026
    Event Number
    99123
    Firm
    Acumed LLC
    FEI Number
    1000125930
    Product Code
    HRS
    Status
    Open, Classified
    Root Cause
    Device Design
    Initiated
    May 28, 2026
    Posted
    June 23, 2026
    Address
    5885 NW Cornelius Pass Rd, Hillsboro, OR, 97124-9370

    Description

    Acumed Hexalob Screw various sizes: REF Numbers: : 3070-27008 2.7mm x 8mm NL Hexalobe Screw; 3070-27009 2.7mm x 9mm NL Hexalobe Screw; 3070-27010 2.7mm x 10mm NL Hexalobe Screw; 3070-27011 2.7mm x 11mm NL Hexalobe Screw; 3070-27012 2.7mm x 12mm NL Hexalobe Screw; 3070-27013 2.7mm x 13mm NL Hexalobe Screw; 3070-27014 2.7mm x 14mm NL Hexalobe Screw; 3070-27015 2.7mm x 15mm NL Hexalobe Screw; 3070-27016 2.7mm x 16mm NL Hexalobe Screw; 3070-27017 2.7mm x 17mm NL Hexalobe Screw; 3070-27018 2.7mm x 18mm NL Hexalobe Screw; 3076-30010 3.0mm x 10mm NL Hexalobe Screw; 3076-30012 3.0mm x 12mm NL Hexalobe Screw; 3076-30014 3.0mm x 14mm NL Hexalobe Screw

    Reason

    Due to manufacturing error, hexalobe screws used with wrist fixation system may break during use.

    Action

    On May 28, 2026 Acumed issued a Urgent Medical Device Recall Notification to affected consignees via phone calls and email. Acumed asked consignees to take the following actions: 1)IMMEDIATELY stop using and/or distributing the product and complete the following actions: 2) Perform a physical count of your inventory. Identify any inventory of the batch/lot numbers listed in the table above. 3) Remove the product segregated in step 1, such that they are taken out of service (i.e., quarantined). 3) Verbally acknowledge (then respond via email) to [email protected] the recall notice. 4) You will be contacted by Field Inventory department who will directly remove the screws and conduct a count reconciliation. 5) This notice needs to be passed on to all those who need to be aware within your organization or facilities where the affected devices have been transferred.

    Distribution

    US Nationwide distribution in the states of AR, CA, CO, CT, FL, GA, IL, KS, KY, LA, MA, MS, NC, NM, NY, OH, OK, OR, PA, SC, TN, TX, UT, WA, WI.

    Quantity

    5,272 units