Inspire Model 3028, IV Implantable Pulse Generator
Recall
- Recall Number
- Z-2159-2024
- Event Number
- 94658
- Firm
- Inspire Medical Systems Inc.
- FEI Number
- 3007666314
- Product Code
- MNQ
- Status
- Open, Classified
- Root Cause
- Process control
- Initiated
- May 16, 2024
- Posted
- June 21, 2024
- Address
- 5500 Wayzata Blvd, Ste 1600, Golden Valley, MN, 55416-1237
Description
Inspire Model 3028, IV Implantable Pulse Generator
There is a potential manufacturing defect which can lead to electrical leakage in the sensing circuit which causes a system malfunction and requires a revision surgery to replace the IPG,
Inspire Medical systems issued an URGENT Medical Device Correction notice to the affected healthcare providers on 05/16/2024 via FedEx overnight. The notice explains the potential problem with the device and risk to the patient and recommends the following actions: We recommend the following actions: " Notify affected patients of this voluntary recall. " Schedule your patient for a monitoring visit to confirm their Inspire therapy is working as intended through waveform and impedance analysis. Monitor patients for reports of variation in stimulation, a lack of therapy effectiveness, or an inability to turn on therapy. " Continue with routine monitoring and conduct waveform and impedance analysis at every routine office visit, as IPG issue may be non-invasively identified with basic waveform and impedance testing. " If abnormal waveforms or impedances are observed, record impedance values at 1.5V, 2.0V, 2.5V, 3.0V and 3.5V. o Let the patient know they will feel 3 short pulses of stimulation. o Some of these stimulation pulses may feel strong. This is normal. " Contact your Inspire representative for additional diagnostic testing and troubleshooting recommendations. For additional questions: please contact your Inspire representative or the Inspire Quality team at [email protected].
Worldwide distribution - US Nationwide and the country of Germany.
24 devices