SIMVIEW NT and SIMVIEW NT with IDI: October 01, 2012 Siemens ceased Simview distribution. Manufactured by: Mecaserto now known as Mecasim Parc de lEsplanade 9,Rue Niels Bohr 77400 Saint Thibault des Vignes- France The intended use of the SIEMENS branded SIMVIEW NT and SIMVIEW NT with IDI is a radiation therapy simulation system.
Recall
- Recall Number
- Z-0786-2014
- Event Number
- 67153
- Firm
- Siemens Medical Solutions USA, Inc
- FEI Number
- 2937457
- Product Code
- KPQ
- Status
- Terminated
- Root Cause
- Device Design
- Initiated
- December 11, 2013
- Posted
- January 17, 2014
- Terminated
- March 31, 2014
- Address
- 757 Arnold Dr, Ste A, Martinez, CA, 94553-3615
Description
SIMVIEW NT and SIMVIEW NT with IDI: October 01, 2012 Siemens ceased Simview distribution. Manufactured by: Mecaserto now known as Mecasim Parc de lEsplanade 9,Rue Niels Bohr 77400 Saint Thibault des Vignes- France The intended use of the SIEMENS branded SIMVIEW NT and SIMVIEW NT with IDI is a radiation therapy simulation system.
In a very rare occurrence an intended movement of the SimView NT simulation system components could not be stopped with usual hand control or the collision detection functionality.
Siemens sent an Urgent Field Safety Notice to all affected customers. The letter identified the product the problem and the action needed to be taken by the customer. What preventive measures can the user take? To stop the movement in this case, push the emergency button / stop button at control console or push the in-room emergency button. The emergency button/ stop button functionality is described in the User Manual. There is no preventive measure to avoid this situation. This letter is intended to bring this potential safety issue to your awareness and to ensure that your personnel are trained about the use of the emergency button / stop button inside the simulation room and on the control console. Always monitor any movement of the simulator components. The Update Instruction containing the Urgent Field Safety Notice will be delivered by the Siemens Customer Service Group, as per their procedure Siemens is working on a solution to mitigate the described situation. You will be informed as soon as the update distributing this solution is available. Please include this Field Safety Notice in your SimView NT Simulator System Owner Manual chapter Safety Advisory Letters where it should remain. In the interests of safety, we ask that you perform the described preventive measures and inform all affected personnel immediately. The relevant National Competent Authority has been informed of this Customer Safety Advisory Notice. We regret any inconvenience that this may cause, and we thank you in advance for your understanding. For further questions please call (925) 602-8157.
Class II Recall - Worldwide Distribution - US Distribution including the states of California, Louisiana, Massachusetts, Pennsylvania, New York, Kentucky and Michigan., and the countries of Bulgaria, Germany, Belarus, Russian Fed., P.R. China, India, Republic Korea, Germany, Costa Rica, Argentina, Portugal, Greece, Bulgaria, Vietnam, Hungary, Italy, Palestinian Ter, Hungary, Jordan, Egypt Poland, Greece, Curacao, St Eus, Malaysia, Egypt, Malaysia, South Africa Turkey, Thailand, Qatar and Iraq.
65 active devices