BEUDAMED
    FDA Enforcement Class II Terminated

    Remote Patient Monitoring System, MDP 2000 Series, Part Numbers: MDP2040-0100, PGM340R3, or PGM340R4. The MDP2000 is intended for use in conjunction with patient monitoring equipment. The MDP2000 is not patient connected Examples of areas where the MDP200 is used include ICU, CCU, PACU, Emergency, Telemetry Step-down and other areas where patient's physiological information are to be observed at one or more locations. Typical information displayed includes ECG and blood pressure waveforms and numeric values which as heart rate and systolic, mean and diastolic pressure. This device acts as the Central Monitor Station, it permits from one (1) to sixteen (16) bedside monitor(s) to be connected simultaneously.

    Recall: Z-0582-2016 · Reported January 13, 2016

    Enforcement

    Recall Number
    Z-0582-2016
    Event ID
    72794
    Classification
    Class II
    Status
    Terminated
    Product Type
    Devices
    Firm
    Vidco, Inc.
    Voluntary / Mandated
    Voluntary: Firm initiated
    Initial Notification
    Two or more of the following: Email, Fax, Letter, Press Release, Telephone, Visit
    Report Date
    January 13, 2016
    Initiation Date
    November 8, 2015
    Classification Date
    January 4, 2016
    Termination Date
    August 16, 2016
    Address
    6175 Sw 112th Ave, N/A, Beaverton, OR, 97008-4838, United States

    Description

    Remote Patient Monitoring System, MDP 2000 Series, Part Numbers: MDP2040-0100, PGM340R3, or PGM340R4. The MDP2000 is intended for use in conjunction with patient monitoring equipment. The MDP2000 is not patient connected Examples of areas where the MDP200 is used include ICU, CCU, PACU, Emergency, Telemetry Step-down and other areas where patient's physiological information are to be observed at one or more locations. Typical information displayed includes ECG and blood pressure waveforms and numeric values which as heart rate and systolic, mean and diastolic pressure. This device acts as the Central Monitor Station, it permits from one (1) to sixteen (16) bedside monitor(s) to be connected simultaneously.

    Reason

    Testing at customer site showed unit Remote Patient Monitoring System MDP2040-0100 in a continuous trap condition, not allowing system to reset and reboot. Two customers recently complained of the system freezing and it could only be restarted if the user re-applied power.

    Code Info

    Serial numbers: 6533-6537, 6561, 6566-6581, 6539, 6540, 6558-6560, 6562, 6508-6528, 6563-6565, 6529, 6531, 6532, 6541, 6551, 6556, and 6557.

    Distribution

    US Nationwide distribution in the states of AZ, CA, MD, NM, NJ, and OH.

    Quantity

    59 units