STEM: QUADRA-H CEMENTLESS, HA COATED STD STEM SIZE 4

Report

Report Number: 3005180920-2020-00255
Event Type: Injury
Date Received: April 24, 2020
Date of Event: March 27, 2020
Report Date: August 5, 2020
Manufacturer: MEDACTA INTERNATIONAL SA
Product Code: JDI
UDI-DI: 07630030802058
PMA / PMN Number: K082792
Adverse Event: Yes
Report Source: Manufacturer report
Reporter Location: AS
Reporter Occupation: 003

Narratives

Additional Manufacturer Narrative · 0

PRELIMINARY INVESTIGATION: FROM THE RECEIVED PHOTO IT IS POSSIBLE TO NOTE THE WEAR OF THE CERAMIC LINER AND SHELL IN THE RIM, DUE TO A CONTINUOUS IMPINGEMENT. IT IS NOT POSSIBLE TO DETERMINE WITH CERTAINTY THE ROOT CAUSE OF THE EVENT, BUT FROM THE RECEIVED INFORMATION THE SURGEON DECLARED THAT THE ACETABULAR COMPONENT WAS MALPOSITIONED.

Description of Event or Problem · 0

INFORMATION RECEIVED FORM (B)(6) ON 16.07.2020; REVISION PERFORMED ON (B)(6) 2020. THE ACETABULAR COMPONENT WAS MALPOSITIONED CAUSING POSTERIOR SUBLUXATION. THE CUP WAS WELL FIXED & REMOVED. ANALYSIS OF THE PHOTO OF THE EXPLANT RECEIVED PERFORMED BY MEDACTA RND DEPARTMENT: FROM THE RECEIVED PHOTO IT IS POSSIBLE TO NOTE THE WEAR OF THE CERAMIC LINER AND SHELL IN THE RIM, DUE TO A CONTINUOUS IMPINGEMENT. IT IS NOT POSSIBLE TO DETERMINE WITH CERTAINTY THE ROOT CAUSE OF THE EVENT, BUT FROM THE RECEIVED INFORMATION THE SURGEON DECLARED THAT THE ACETABULAR COMPONENT WAS MALPOSITIONED.

Additional Manufacturer Narrative · 1

BATCH REVIEW PERFORMED BY MEDACTA REGULATORY AFFAIRS DEPARTMENT ON 2 APRIL 2020: LOT 092850: (B)(4) ITEMS MANUFACTURED AND RELEASED ON 18-FEB-2010. EXPIRATION DATE: 2014-12-31. NO ANOMALIES FOUND RELATED TO THE PROBLEM. TO DATE, ALL ITEMS OF THE SAME LOT HAVE BEEN ALREADY SOLD WITHOUT ANY SIMILAR REPORTED EVENT SINCE 2016. ADDITIONAL IMPLANT INVOLVED: STEM: QUADRA-H 01.12.024 CEMENTLESS, HA COATED STD STEM SIZE 4 (K082792) LOT. 100769. BATCH REVIEW PERFORMED BY MEDACTA REGULATORY AFFAIRS DEPARTMENT ON 2 APRIL 2020: LOT 100769: (B)(4) ITEMS MANUFACTURED AND RELEASED ON 18-MAY-2010. EXPIRATION DATE: 2015-04-31. NO ANOMALIES FOUND RELATED TO THE PROBLEM. TO DATE, ALL ITEMS OF THE SAME LOT HAVE BEEN ALREADY SOLD WITHOUT ANY SIMILAR REPORTED EVENT SINCE 2016. OTHER DEVICES (CUP, LINER AND HEAD) NOT REGISTERED IN USA WERE REPORTED IN THIS COMPLAINT. HOWEVER, HERE BELOW YOU WILL FIND THEIR DOCUMENT REVIEW. ADDITIONAL IMPLANT INVOLVED: CUP: VERSAFITCUP CC 01.26.56MBT ACETABULAR SHELL CC Ø 56 LOT. 103196. BATCH REVIEW PERFORMED BY MEDACTA REGULATORY AFFAIRS DEPARTMENT ON 2 APRIL 2020: LOT 103196: (B)(4) ITEMS MANUFACTURED AND RELEASED ON 14-DEC-2010. EXPIRATION DATE: 2015-10-31. NO ANOMALIES FOUND RELATED TO THE PROBLEM. TO DATE, (B)(4) ITEMS OF THE SAME LOT HAVE BEEN ALREADY SOLD WITHOUT ANY SIMILAR REPORTED EVENT SINCE 2016. ADDITIONAL IMPLANT INVOLVED: CUP: VERSAFITCUP CC 01.26.56MBT ACETABULAR SHELL CC LIGHT Ø 56 LOT. 101376. BATCH REVIEW PERFORMED BY MEDACTA REGULATORY AFFAIRS DEPARTMENT ON 2 APRIL 2020: LOT 101376: (B)(4) ITEMS MANUFACTURED AND RELEASED ON 13-JUL-2010. EXPIRATION DATE: 2015-06-31. NO ANOMALIES FOUND RELATED TO THE PROBLEM. TO DATE, ALL ITEMS OF THE SAME LOT HAVE BEEN ALREADY SOLD WITHOUT ANY SIMILAR REPORTED EVENT SINCE 2016. ADDITIONAL IMPLANT INVOLVED: IMPLANTS FROM CERAMTEC 38.49.7188.545.20 CERAMIC LINER Ø 36 / E LOT. 667718. DUE TO A LACK OF INFORMATION ABOUT THE LASER ENGRAVING THE IDENTIFICATION OF THE COMPLAINED PARTS IS ONLY POSSIBLE BASED ON THE INFORMATION PROVIDED BY MEDACTA. THE COMPLAINED PARTS BELONG TO THE SHOP ORDERS (B)(4) AND (B)(4) (BALL HEAD) AS WELL AS (B)(4) AND (B)(4) (INSERT). PROTOCOLS AND CERTIFICATE OF CONFORMANCE WERE REVIEWED. THE QUALITY DOCUMENTS (INCLUDING THE STERILISATION CERTIFICATES) SHOW THAT THE VALUES OBTAINED ON THE BALL HEAD AND INSERT WERE ACCORDING TO THE SPECIFICATION VALID AT THE TIME OF PRODUCTION. SUMMARY. THE COMPONENT PROPERTIES AND THE MICROSTRUCTURE AS OBTAINED FROM THE QUALITY DOCUMENTS FULFIL THE REQUIREMENTS AS SPECIFIED AT THE TIME OF PRODUCTION. THERE ARE NO INDICATIONS OF ANY PRE-EXISTING MATERIAL DEFECT OR NON-CONFORMITIES REGARDING STERILISATION. DUE TO THE FACT, THAT THE CERAMIC PARTS ARE STILL IMPLANTED FURTHER INVESTIGATIONS CANNOT BE DONE. ADDITIONAL IMPLANT INVOLVED: IMPLANTS FROM CERAMTEC 38.49.7188.545.20 CERAMIC LINER Ø 36 / E LOT. 663586. DUE TO A LACK OF INFORMATION ABOUT THE LASER ENGRAVING THE IDENTIFICATION OF THE COMPLAINED PARTS IS ONLY POSSIBLE BASED ON THE INFORMATION PROVIDED BY MEDACTA. THE COMPLAINED PARTS BELONG TO THE SHOP ORDERS (B)(4) AND (B)(4) (BALL HEAD) AS WELL AS (B)(4) AND (B)(4) (INSERT). PROTOCOLS AND CERTIFICATE OF CONFORMANCE WERE REVIEWED. THE QUALITY DOCUMENTS (INCLUDING THE STERILISATION CERTIFICATES) SHOW THAT THE VALUES OBTAINED ON THE BALL HEAD AND INSERT WERE ACCORDING TO THE SPECIFICATION VALID AT THE TIME OF PRODUCTION. SUMMARY. THE COMPONENT PROPERTIES AND THE MICROSTRUCTURE AS OBTAINED FROM THE QUALITY DOCUMENTS FULFIL THE REQUIREMENTS AS SPECIFIED AT THE TIME OF PRODUCTION. THERE ARE NO INDICATIONS OF ANY PRE-EXISTING MATERIAL DEFECT OR NON-CONFORMITIES REGARDING STERILISATION. DUE TO THE FACT, THAT THE CERAMIC PARTS ARE STILL IMPLANTED FURTHER INVESTIGATIONS CANNOT BE DONE. ADDITIONAL IMPLANT INVOLVED: IMPLANTS FROM CERAMTEC 38.49.7179.275.00 BIOLOX DELTA CERAMIC BALL HEAD 12/14 Ø 36 SIZE S - 4 LOT. 658425. DUE TO A LACK OF INFORMATION ABOUT THE LASER ENGRAVING THE IDENTIFICATION OF THE COMPLAINED PARTS IS ONLY POSSIBLE BASED ON THE INFORMATION PROVIDED BY MEDACTA. THE COMPLAINED PARTS BELONG TO THE SHOP ORDERS (B)(4) AND (B)(4) (BALL HEAD) AS WELL AS (B)(4) AND (B)(4) (INSERT). PROTOCOLS AND CERTIFICATE OF CONFORMANCE WERE REVIEWED. THE QUALITY DOCUMENTS (INCLUDING THE STERILISATION CERTIFICATES) SHOW THAT THE VALUES OBTAINED ON THE BALL HEAD AND INSERT WERE ACCORDING TO THE SPECIFICATION VALID AT THE TIME OF PRODUCTION. SUMMARY. THE COMPONENT PROPERTIES AND THE MICROSTRUCTURE AS OBTAINED FROM THE QUALITY DOCUMENTS FULFIL THE REQUIREMENTS AS SPECIFIED AT THE TIME OF PRODUCTION. THERE ARE NO INDICATIONS OF ANY PRE-EXISTING MATERIAL DEFECT OR NON-CONFORMITIES REGARDING STERILISATION. DUE TO THE FACT, THAT THE CERAMIC PARTS ARE STILL IMPLANTED FURTHER INVESTIGATIONS CANNOT BE DONE. ADDITIONAL IMPLANT INVOLVED: IMPLANTS FROM CERAMTEC 38.49.7179.275.00 BIOLOX DELTA CERAMIC BALL HEAD 12/14 Ø 36 SIZE S - 4 LOT. 643475. DUE TO A LACK OF INFORMATION ABOUT THE LASER ENGRAVING THE IDENTIFICATION OF THE COMPLAINED PARTS IS ONLY POSSIBLE BASED ON THE INFORMATION PROVIDED BY MEDACTA. THE COMPLAINED PARTS BELONG TO THE SHOP ORDERS (B)(4) AND (B)(4) (BALL HEAD) AS WELL AS (B)(4) AND (B)(4) (INSERT). PROTOCOLS AND CERTIFICATE OF CONFORMANCE WERE REVIEWED. THE QUALITY DOCUMENTS (INCLUDING THE STERILISATION CERTIFICATES) SHOW THAT THE VALUES OBTAINED ON THE BALL HEAD AND INSERT WERE ACCORDING TO THE SPECIFICATION VALID AT THE TIME OF PRODUCTION. SUMMARY. THE COMPONENT PROPERTIES AND THE MICROSTRUCTURE AS OBTAINED FROM THE QUALITY DOCUMENTS FULFIL THE REQUIREMENTS AS SPECIFIED AT THE TIME OF PRODUCTION. THERE ARE NO INDICATIONS OF ANY PRE-EXISTING MATERIAL DEFECT OR NON-CONFORMITIES REGARDING STERILISATION. DUE TO THE FACT, THAT THE CERAMIC PARTS ARE STILL IMPLANTED FURTHER INVESTIGATIONS CANNOT BE DONE.

Description of Event or Problem · 1

THIS PATIENT HAS DEVELOPED A STIFFNESS & CRUNCHING, GRINDING SOUND IN HER RIGHT HIP AFTER 9 YEARS FROM THE PRIMARY ( (B)(6) 2011 AND (B)(6) 2011 ARE THE PRIMARY SURGERIES DATE FOR RIGHT AND LEFT HIP, BUT WE DONT KNOW WHICH IS THE RIGHT HIP IMPLANTATION DATE). THE PATIENT IS BILATERAL AND WE DON'T HAVE THE INFORMATION WHICH OF THE LISTED IMPLANTS WILL BE REVISED (RIGHT AND LEFT HIP IMPLANTS ARE INSERTED IN THE COMPLAINT). THIS INFORMATION WILL BE CONFIRMED AFTER THE REVISION SURGERY, WHICH WAS ORIGINALLY PLANNED FOR (B)(6) 2020 BUT POSTPONED TO AN UNKNOWN DATE.

Devices

Seq	Brand	Generic	Product Code	Manufacturer	Model	Lot	UDI-DI
459706	STEM: QUADRA-H CEMENTLESS, HA COATED STD STEM SIZE 4	CEMENTLESS HIP STEM	JDI	MEDACTA INTERNATIONAL SA	01.12.024	092850	07630030802058

Patients

Seq	Age	Sex	Outcome	Treatment
1			Required Intervention