BEUDAMED
    FDA Adverse Event Malfunction Summary report: N

    BD PHASEAL¿ INJECTOR LUER LOCK N35C

    MDR report key: 8471663 · Received April 1, 2019

    Report

    Report Number
    3003152976-2019-00232
    Event Type
    Malfunction
    Date Received
    April 1, 2019
    Date of Event
    March 1, 2019
    Report Date
    April 8, 2019
    Manufacturer
    BECTON DICKINSON, S.A.
    Product Code
    ONB
    UDI-DI
    30382905150044
    PMA / PMN Number
    K140591
    Adverse Event
    Yes
    Product Problem
    Yes
    Report Source
    Manufacturer report
    Reporter Location
    SW
    Reporter Occupation
    OTHER HEALTH CARE PROFESSIONAL

    Narratives

    Additional Manufacturer Narrative · 0

    INVESTIGATION SUMMARY: FOUR PICTURES WERE RECEIVED. NO SAMPLES AVAILABLE. TAKING INTO ACCOUNT THE PICTURES RECEIVED, IT SEEMS THAT AT LEAST ONE OF THE ROTATION STOPS IS BROKEN. THE WINGS OF THE PISTON ARE ALSO DAMAGED. THREE RETAINED SAMPLES WERE TAKEN FOR INVESTIGATION. NO DAMAGES IS FOUND IN RETAINED SAMPLES. THE INJECTORS ARE FUNCTIONAL AND IT IS POSSIBLE TO ATTACH THEM TO THE MATING COMPONENT WITHOUT ISSUES. (NO BREAKAGE IN ROTATION STOPS). A DEVICE HISTORY REVIEW WAS PERFORMED FOR REPORTED LOT 1812103, NO DEVIATIONS OR NON-CONFORMANCES RELATED TO THIS ISSUE WERE IDENTIFIED DURING THE MANUFACTURING PROCESS. INSPECTIONS AND TESTS: THE TESTS PERFORMED DURING THE MANUFACTURING PROCESS TO AVOID FAULTY PARTS ARE LISTED BELOW: DURING MOLDING PROCESS (ACCORDING PH-300 CURRENT VERSION): VISUAL INSPECTIONS FOR INJECTOR PARTS (CYLINDER, NEEDLE HOUSING, SAFETY SLEEVE, PISTON AND MEMBRANE) ARE PERFORMED BY THE OPERATOR TO AVOID FAULTY PARTS (FLASHES, UNFILLED AND BURNED PARTS, ETC). CRITICAL TO QUALITY DIMENSIONS OF ALL INJECTOR COMPONENTS ARE MEASURED TO CHECK IF THE DIMENSIONS ARE WITHIN TOLERANCE. THE DISTANCE BETWEEN THE ROTATION STOPS IS MEASURED AT THE BEGINNING OF THE LOT AND AFTER A MACHINE STOP: GO/ NO GO GAUGE. ASSEMBLY PROCESS: (ACCORDING TO PH-301 CURRENT VERSION) THE FOLLOWING VISUAL INSPECTIONS ARE PERFORMED BY THE OPERATOR: SAFETY SLEEVE MUST BE CONNECTED AND SHOULD BE TURNING WITH THE CYLINDER AND PISTON. THE FUNCTIONALITY OF THE GRIPS IS VERIFIED. VERIFY THE CORRECT WELDING OF THE MEMBRANE, COLOR AND ASPECT. CYLINDER ASSEMBLY. PISTON MUST BE FIXED BY THE SAFETY SLEEVE. NEEDLE HOUSING SHOULD ROTATE CLOCKWISE AND TIP OF THE CANNULA MUST BE OBSERVED. CANNULA LENGTH (WITH A CALIPER GAUGE). FUNCTIONALITY AND PISTON WELDING TEST: QUALITY AND FUNCTIONALITY OF THE MEMBRANE IS VERIFIED AFTER BE WELDING AND PUNCTURED BY THE CANNULA. LEAKAGE TEST IS PERFORMED ACCORDING TO PC-226 TO ENSURE THE QUALITY OF THE MEMBRANE. POSITIVE PRESSURE TEST IS PERFORMED ACCORDING TO PC-225 TO ENSURE THE QUALITY OF THE SEALING. CONCLUSION: THE DEFECT IS CONFIRMED: THE ROTATION STOPS ARE BROKEN AND THEREFORE THE INJECTOR IS NOT FUNCTIONAL. HOWEVER, THIS DEFECT IS NOT CONFIRMED IN RETAINED SAMPLES. THERE IS NO EVIDENCE OF ANY FAILURE DURING THE MANUFACTURING PROCESS IN DHRS. AS OTHER SIMILAR COMPLAINTS WERE RECEIVED IN FY'16, A PROJECT WAS OPEN: #1245. AFTER HAVING VISUALLY INSPECTED 69120 SAMPLES AND HAVING TESTED 3456 SAMPLES, NO DEFECTIVE INJECTORS WERE FOUND DURING MANUFACTURING PROCESS. THE DEFECT COULDN¿T BE CONNECTED TO AN ISSUE DURING MANUFACTURING PROCESS. IN FY¿19 A CAPA WAS OPEN TO ASSESS ISSUES RELATED TO INJECTOR ENGAGEMENT. THIS DEFECT IS BEING EVALUATED UNDER THIS CAPA 708467.

    Description of Event or Problem · 0

    IT WAS REPORTED THAT A BD PHASEAL¿ INJECTOR LUER LOCK N35C WAS DAMAGED THE FOLLOWING WAS REPORTED, "THE CUSTOMER COULDN'T GET THE NEEDLE DOWN TO THE CONNECTOR. IT WAS HARD AND STUCKED. THE NEEDLE DIDN´T GO DOWN IN THE CONNECTOR."

    Additional Manufacturer Narrative · 1

    A DEVICE EVALUATION IS ANTICIPATED, BUT HAS NOT YET BEGUN. UPON COMPLETION OF THE INVESTIGATION, A SUPPLEMENTAL REPORT WILL BE FILED. (B)(6).

    Description of Event or Problem · 1

    IT WAS REPORTED THAT A BD PHASEAL¿ INJECTOR LUER LOCK N35C WAS DAMAGED THE FOLLOWING WAS REPORTED, "THE CUSTOMER COULDN'T GET THE NEEDLE DOWN TO THE CONNECTOR. IT WAS HARD AND STUCKED. THE NEEDLE DIDN´T GO DOWN IN THE CONNECTOR."

    Devices

    Seq Brand Generic Product Code Manufacturer Model Lot UDI-DI
    261514 BD PHASEAL¿ INJECTOR LUER LOCK N35C INTRAVASCULAR ADMINISTRATION SET ONB BECTON DICKINSON, S.A. 1812103 30382905150044

    Patients

    Seq Age Sex Outcome Treatment
    1 Other