BEUDAMED
    FDA Adverse Event Injury Summary report: N

    LINER: MPACT FLAT PE HC LINER Ø28/B

    MDR report key: 8009365 · Received October 26, 2018

    Report

    Report Number
    3005180920-2018-00825
    Event Type
    Injury
    Date Received
    October 26, 2018
    Date of Event
    September 17, 2018
    Report Date
    November 28, 2018
    Manufacturer
    MEDACTA INTERNATIONAL SA
    Product Code
    LPH
    UDI-DI
    07630030811531
    PMA / PMN Number
    K103721
    Adverse Event
    Yes
    Report Source
    Manufacturer report
    Reporter Location
    IS
    Reporter Occupation
    003

    Narratives

    Additional Manufacturer Narrative · 0

    ON THE 29 OCTOBER 2018 THE SUPPLIER OF THE BALL HEAD REPORTED: THE COMPONENT PROPERTIES AND THE MICROSTRUCTURE AS OBTAINED FROM THE QUALITY DOCUMENTS FULFIL THE REQUIREMENTS AS SPECIFIED AT THE TIME OF PRODUCTION. THERE ARE NO INDICATIONS OF ANY PRE-EXISTING MATERIAL DEFECT. DUE TO A LACK OF CERAMIC PARTS FURTHER INVESTIGATIONS CANNOT BE DONE.

    Additional Manufacturer Narrative · 1

    BATCH REVIEW PERFORMED ON 25 OCTOBER 2018: LOT 176961: (B)(4) ITEMS MANUFACTURED AND RELEASED ON 01 MARCH 2018. EXPIRATION DATE: 2023-02-13. NO ANOMALIES FOUND RELATED TO THE PROBLEM. TO DATE, (B)(4) ITEMS OF THE SAME LOT HAVE BEEN ALREADY SOLD WITHOUT ANY SIMILAR REPORTED EVENT. ADDITIONAL COMPONENT REVISED: BALL HEADS: MECTACER 01.29.202 BIOLOX DELTA CERAMIC BALL HEAD 12/14 Ø 28 SIZE M 0 (K112115). LOT 163447: (B)(4) ITEMS MANUFACTURED AND RELEASED ON 04 OCTOBER 2016. EXPIRATION DATE: 2021-09-20. NO ANOMALIES FOUND RELATED TO THE PROBLEM. TO DATE, (B)(4) ITEMS OF THE SAME LOT HAVE BEEN ALREADY SOLD WITHOUT ANY SIMILAR REPORTED EVENT. CLINICAL EVALUATION PERFORMED BY MEDICAL AFFAIRS DIRECTOR: EARLY DISLOCATION FEW DAYS AFTER PRIMARY CEMENTLESS THA IN A PATIENT WITH MARKED PELVIC ANTEVERSION DURING AN EXTREME FLEXION/ABDUCTION MOVEMENT. THE APPROACH USED FOR THR WAS NOT ANTERIOR AND THE TIME ELAPSED AFTER SURGERY VERY LIMITED. THE CAUSE FOR THIS ADVERSE EVENT IS NOT A FAULT OF THE IMPLANTED DEVICES. MYSOLUTION DEPARTMENT ANALYSED THE CASE FROM THE AVAILABLE IMAGES AND REPORTED AS FOLLOW: POST-OPERATORY RECONSTRUCTION: THE ANALYSIS OF POSTOPERATIVE CT SCANS PERFORMED BY THE MYHIP DEPARTMENTS REQUIRES THE SAME PROTOCOL USED FOR THE PREOPERATIVE CT SCANS: AT THE PELVIS LEVEL, SLICE THICKNESS AND SLICE SPACING MUST BE NO MORE THAN 1MM. FOR FEMUR AND ILIUM, A SOLID COMPOSED BY THE UNION OF THE BONE AND THE IMPLANT IS CREATED, FOLLOWING THE PROCEDURE USED DURING THE MYHIP 3D RECONSTRUCTION. BY USING THIS METHOD, AN ERROR OF ±1° ON THE MEASURE CAN BE INTRODUCED. THE DISTAL FEMUR HAS NOT BEEN RECONSTRUCTED BECAUSE ITS SERIES WERE MISSING. THEREFORE PARAMETERS AS FEMORAL NECK ANTEVERSION HAS NOT BEEN CORRECTLY EVALUATED. POST-OP VALUES DEFINITION: CONCERNING THE FEMORAL IMPLANT EVALUATION, ALL THE PARAMETERS HAVE BEEN DEFINED THROUGH THE SOFTWARE MYPLANNER. ONLY THE FEMORAL CUT HEIGHT HAS BEEN MODIFIED MANUALLY, TO EVALUATE A PROPER MATCHING WITH THE EXISTENT IMPLANT. THE IMPLANT MODEL WAS SUBSEQUENTLY IMPORTED ON MIMICS TO DOUBLE CHECK THE CORRECT MATCHING. AS THE CONTOUR OF THE IMPLANT MODEL DID NOT MATCH THE CONTOUR OF THE IMAGES POST-OP ON ALL CT SLICES, THE POSITION OF THE 3D MODEL IN THE MYPLANNER WAS MODIFIED UNTIL WE FOUND THE CORRECT OVERLAPPING OF THE IMPLANT MODEL ON THE IMAGES POST-OP. ONCE THE CORRECT OVERLAPPING HAS BEEN FOUND, THE VALUES SET INTO THE MYPLANNER HAVE BEEN CONSIDERED AS THE POST-OPERATIVE IMPLANT POSITIONING. THE PARAMETERS EVALUATED FOR THE STEM POSITIONING ARE THE FOLLOWING: PLANNING POST-OP: STEM ANTEVERSION (DEG): 9.0°, STEM SIZE: 4, STEM HEAD SIZE: 28/M. THE MEASURES OF THE ACETABULAR IMPLANT ANTEVERSION AND INCLINATION HAVE BEEN DEFINED OVERLAPPING, THROUGH THE SOFTWARE MYPLANNER, THE CONTOUR OF THE IMPLANT MODEL ON THE IMPLANT IN THE POST-OP IMAGES. THE PARAMETERS EVALUATED FOR THE CUP POSITIONING ARE THE FOLLOWING: CUP SIZE: 46, CUP INCLINATION (DEG): 40°, CUP ANTEVERSION (DEG): 10°.

    Description of Event or Problem · 1

    2 WEEKS AFTER THR (LATERAL APPROACH) AND DURING HYPERFLEXION + ABDUCTION ACTIVITY (SITTING AND TRYING TO DRY THE FEET AFTER A SHOWER), PATIENT FELT SEVERE PAIN: DISLOCATION WAS DIAGNOSED (FEMORAL HEAD DISLOCATED FROM THE MODULAR LINER). CLOSED REDUCTION UNDER ANAESTHESIA WAS SUCCESSFULLY PERFORMED. NO DEVICE WAS EXPLANTED. SURGEON STATEMENT: THE DYNAMIC PELVIS TILT IS PROBLEMATIC WITH THIS PATIENT DUE TO HER SPINE PELVIC RELATIONSHIP. HE IS ALSO CONCERNED ABOUT MINIMAX NECK ANTEVERSION.

    Devices

    Seq Brand Generic Product Code Manufacturer Model Lot UDI-DI
    850722 LINER: MPACT FLAT PE HC LINER Ø28/B HIP HC LINER LPH MEDACTA INTERNATIONAL SA 176961 07630030811531

    Patients

    Seq Age Sex Outcome Treatment
    1 76 YR Required Intervention