BEUDAMED
    FDA Adverse Event Injury Summary report: N

    AIM-ARM F/PHILOS 3.5

    MDR report key: 7584313 · Received June 8, 2018

    Report

    Report Number
    8030965-2018-54227
    Event Type
    Injury
    Date Received
    June 8, 2018
    Date of Event
    April 27, 2018
    Report Date
    May 15, 2018
    Manufacturer
    OBERDORF SYNTHES PRODUKTIONS GMBH
    Product Code
    FZX
    UDI-DI
    07611819334458
    PMA / PMN Number
    EXEMPT
    Adverse Event
    Yes
    Product Problem
    Yes
    Report Source
    Manufacturer report
    Reporter Location
    GM
    Reporter Occupation
    HEALTH PROFESSIONAL

    Narratives

    Additional Manufacturer Narrative · 0

    DEPUY SYNTHES IS SUBMITTING THIS REPORT PURSUANT TO THE PROVISIONS OF 21 CFR, PART 803. THIS REPORT MAY BE BASED ON INFORMATION WHICH DEPUY SYNTHES HAS NOT BEEN ABLE TO INVESTIGATE OR VERIFY PRIOR TO THE REQUIRED REPORTING DATE. THIS REPORT DOES NOT REFLECT A CONCLUSION BY FDA, DEPUY SYNTHES OR ITS EMPLOYEES THAT THE REPORT CONSTITUTES AN ADMISSION THAT THE DEVICE, DEPUY SYNTHES, OR ITS EMPLOYEES CAUSED OR CONTRIBUTED TO THE POTENTIAL EVENT DESCRIBED IN THIS REPORT. DEVICE HISTORY RECORD (DHR) REVIEW: PART: 03.122.007; LOT:9821999 MANUFACTURING SITE: HÄGENDORF; RELEASE TO WAREHOUSE DATE: 23. MARCH 2016. THE DEVICE HISTORY RECORD SHOWS THIS LOT OF (B)(4) PIECES WAS PROCESSED THROUGH THE NORMAL MANUFACTURING AND INSPECTION OPERATIONS WITH NO REWORK OR NONCONFORMITIES NOTED. THIS LOT MET ALL DIMENSIONAL, VISUAL AND 100% FUNCTION TEST CRITERIA AT THE TIME OF RELEASE WITH NO ISSUES DOCUMENTED DURING THE MANUFACTURING PROCESS. REVIEW OF THE DEVICE HISTORY RECORD SHOWED THAT THERE WERE NO ISSUES DURING THE MANUFACTURE OF THIS PRODUCT WHICH WOULD CONTRIBUTE TO THIS COMPLAINT CONDITION. H3, H6: INVESTIGATION SUMMARY: INVESTIGATION SITE: HÄGENDORF SELECTED FLOW(S): 2. DEVICE INTERACTION/FUNCTIONAL VISUAL INSPECTION: A VISUAL INSPECTION OF THE RETURNED AIM-ARM 03.122.007 F/PHILOS 3.5 WAS PERFORMED. NO DAMAGES WERE FOUND ON THE AIMING ARM. THE LOCATING PINS AND THE HOLES IN THE AIMING ARM WHERE THE DRILL SLEEVES GETTING ATTACHED ARE IN VERY GOOD CONDITION, INDICATING A LOW USE OF THE SYSTEM. FUNCTIONAL TEST: A FUNCTIONAL TEST COULD BE REPEATED ACCORDING TO THE INSPECTION SHEET OF THE WORK ORDER DHR 15056948, PRODUCTION LOT 9821999, SAME WAY AS THE AIMING ARM 03.122.007 WAS TESTED DURING PRODUCTION, WITH THE CORRESPONDING FUNCTION GAUGES. THE TEST WAS COMPLETED BY FUNCTIONAL GAUGE 60036191 NO. 10298_H AND FUNCTIONAL GAUGE 60036192 NO. 10176_H. DURING THE EXECUTION OF THE FUNCTION TESTS NO DEVIATIONS COULD BE DETERMINED. DRAWING/SPECIFICATION REVIEW: THE DEVICE DRAWINGS WITH THE CORRESPONDING REVISIONS WERE USED AT THE TIME OF MANUFACTURE. THE MANUFACTURED AND CURRENT REVISIONS OF THE DRAWINGS WERE REVIEWED AND NO RELEVANT DESIGN CHANGES WERE IDENTIFIED. DIMENSIONAL INSPECTION: NO DEVIATIONS OF THE OUTER DIAMETERS AT THE POSITIONING PINS, (ROUND LOCATING PIN 50159022 AND DIAMOND LOCATING PIN 50159023) WERE FOUND WHICH WOULD INDICATE THAT THERE IS AN INACCURACY BETWEEN THE CONNECTION OF THE AIMING ARM AND INSERTION HANDLE. MATERIAL OR HARDNESS REVIEW: RAW-MATERIAL CERTIFICATIONS WERE REVIEWED. CONCLUSION: DURING MANUFACTURING INVESTIGATION, ALL RELEVANT AND SIGNIFICANT CHARACTERISTICS LIKE DIMENSIONS OF THE LOCATING PINS AND FUNCTIONAL TEST FOR THE ALIGNMENT WERE CHECKED. THE FUNCTIONAL TEST INCLUDES AN ASSEMBLY TEST WERE THE COUNTERPART IS SIMULATED. ALL TESTED CHARACTERISTICS MEETS SPECIFICATIONS. NO MANUFACTURING RELATED ISSUE WAS IDENTIFIED AND/OR CONFIRMED. THE COMPLAINT CANNOT BE REPLICATED WITH THE RETURNED DEVICE. BASED ON THE INVESTIGATION FINDINGS, IT HAS BEEN DETERMINED THAT NO CORRECTIVE AND/OR PREVENTATIVE ACTION IS PROPOSED. DEVICE WAS USED FOR TREATMENT, NOT DIAGNOSIS. IF INFORMATION IS OBTAINED THAT WAS NOT AVAILABLE FOR THE INITIAL MEDWATCH, A FOLLOW-UP MEDWATCH WILL BE FILED AS APPROPRIATE.

    Additional Manufacturer Narrative · 0

    DEPUY SYNTHES IS SUBMITTING THIS REPORT PURSUANT TO THE PROVISIONS OF 21 CFR, PART 803. THIS REPORT MAY BE BASED ON INFORMATION WHICH DEPUY SYNTHES HAS NOT BEEN ABLE TO INVESTIGATE OR VERIFY PRIOR TO THE REQUIRED REPORTING DATE. THIS REPORT DOES NOT REFLECT A CONCLUSION BY FDA, DEPUY SYNTHES OR ITS EMPLOYEES THAT THE REPORT CONSTITUTES AN ADMISSION THAT THE DEVICE, DEPUY SYNTHES, OR ITS EMPLOYEES CAUSED OR CONTRIBUTED TO THE POTENTIAL EVENT DESCRIBED IN THIS REPORT. ADDITIONAL NARRATIVE: PATIENT ETHNICITY IS UNKNOWN. THE DEVICE WAS RECEIVED, THE INVESTIGATION COULD NOT BE COMPLETED, AND NO CONCLUSION COULD BE DRAWN, AS PRODUCT IS ENTERING THE COMPLAINT SYSTEM. DEVICE WAS USED FOR TREATMENT, NOT DIAGNOSIS. IF INFORMATION IS OBTAINED THAT WAS NOT AVAILABLE FOR THE INITIAL MEDWATCH, A FOLLOW-UP MEDWATCH WILL BE FILED AS APPROPRIATE.

    Additional Manufacturer Narrative · 1

    PATIENT INFORMATION WAS NOT PROVIDED FOR REPORTING. DEVICE IS AN INSTRUMENT AND IS NOT IMPLANTED / EXPLANTED. DEVICE IS EXPECTED TO BE RETURNED FOR MANUFACTURER REVIEW/INVESTIGATION, BUT HAS NOT BEEN RECEIVED YET. REPORTER CONTACT NUMBER WAS NOT PROVIDED. (B)(4). THE INVESTIGATION COULD NOT BE COMPLETED; NO CONCLUSION COULD BE DRAWN, AS NO PRODUCT WAS RECEIVED. DEVICE WAS USED FOR TREATMENT, NOT DIAGNOSIS. IF INFORMATION IS OBTAINED THAT WAS NOT AVAILABLE FOR THE INITIAL MEDWATCH, A FOLLOW-UP MEDWATCH WILL BE FILED AS APPROPRIATE.

    Description of Event or Problem · 1

    DEVICE REPORT FROM SYNTHES EUROPE REPORTS AN EVENT IN (B)(6) AS FOLLOWS: IT WAS REPORTED THAT DURING THE SURGERY ON (B)(6) 2018, PROPERLY LOCKING OF IMPLANTS WITH AIMING ARM WAS NOT POSSIBLE. THE GUIDING DEVICE AND AIMING ARM WERE AFFECTED. IN A FIRST STEP GUIDING DEVICE HAD BEEN CHANGED. THIS DID NOT IMPROVE THE SITUATION. AIMING ARM WAS CHANGED IN A SECOND STEP. THE SURGERY WAS PROLONGED ABOUT 15 MINUTES AS THEY SWITCHED FROM LAPAROSCOPIC TO OPEN. SURGERY WAS COMPLETED SUCCESSFULLY. WHEN DEVICES WERE TESTED PRE-OPERATIVE, DRILL GUIDE IN GUIDING DEVICE AND HOLE DID NOT CORRESPOND. CONCOMITANT DEVICE REPORTED: PHILOS PLATE (PART# 441.903, LOT# UNKNOWN, QUANTITY 1). THIS REPORT IS FOR ONE (1) AIMING ARM F/LCP PROXIMAL HUMERUS PLATE. THIS IS REPORT 1 OF 2 FOR (B)(4).

    Devices

    Seq Brand Generic Product Code Manufacturer Model Lot UDI-DI
    425806 AIM-ARM F/PHILOS 3.5 GUIDE FZX OBERDORF SYNTHES PRODUKTIONS GMBH 9821999 07611819334458

    Patients

    Seq Age Sex Outcome Treatment
    1 Required Intervention