BEUDAMED
    FDA Adverse Event Malfunction Summary report: N

    BSM-3572A

    MDR report key: 7232109 · Received January 31, 2018

    Report

    Report Number
    8030229-2018-00033
    Event Type
    Malfunction
    Date Received
    January 31, 2018
    Date of Event
    January 3, 2018
    Report Date
    October 22, 2019
    Manufacturer
    NIHON KOHDEN CORPORATION
    Product Code
    MHX
    UDI-DI
    04931921113691
    PMA / PMN Number
    K080342
    Removal / Correction Number
    NOT APPLICABLE
    Product Problem
    Yes
    Report Source
    Manufacturer report
    Reporter Location
    KS, US
    Reporter Occupation
    BIOMEDICAL ENGINEER

    Narratives

    Additional Manufacturer Narrative · 0

    DETAILS OF THE COMPLAINT ON (B)(6) 2018, CUSTOMER AT (B)(6) HOSPITAL REPORTED WHEN A TG-920P CABLE IS PLUGGED INTO THE BEDSIDE MONITOR (BSM-3572A SN: (B)(6), THE UNIT WOULD GET AN AUTO CALIBRATION EVERY COUPLE OF MINUTES. THE AUTO CALIBRATION WOULD THROW OFF THE MEASUREMENTS, DRIVING THEM LOWER. THE CABLE DID THE SAME WHEN USED ON ANOTHER MONITOR OF THE SAME TYPE BUT NOT WHEN IN USE ON AN OLDER BSM MODEL. SERVICE REQUESTED TROUBLESHOOTING/ASSISTANCE. SERVICE PERFORMED CUSTOMER WAS ADVISED THE REASON IT MAY STILL WORK FOR THE OLDER MODELS IS BECAUSE THE OLDER SOFTWARE DOES NOT LOOK FOR AS MANY ERRORS AS THE NEW BEDSIDE MONITORS DO. THE NEWER MODEL MONITORS USE THE TG-980P CABLE. CUSTOMER WAS TO HAVE THE HOSPITAL ORDER A TG-980P AND SEE IF IT FIXES THEIR ISSUE. INVESTIGATION RESULT THE BSM WARRANTY BEGAN 07/30/2017. THE ISSUE WAS REPORTED AFTER 3 MONTHS AT CUSTOMER FACILITY. REVIEW OF DEVICE SAP HISTORY FOUND NO PREVIOUSLY REPORTED ISSUES WITH CALIBRATION AND/OR TG-920P. TROUBLESHOOTING ISOLATED THE ISSUE TO THE TG-920P CABLE. INFORMATION ON THE CABLE, ALONG WITH ITS AGE AND CONDITION, WAS NOT PROVIDED. CUSTOMER DID NOT RETURN THE CABLE AND NKA EVALUATION COULD NOT BE PERFORMED. THE TG-920P SENSOR KIT MEASURES PARTIAL PRESSURE OF EXPIRED CO2 OF A PATIENT AND IS USED FOR NK BEDSIDE MONITORS. THE TG-920P KIT CONSISTS OF A TG-121T CO2 SENSOR AND A JG-920P OR JG-921T3 CO2 ADAPTER. PER TG-920P OPERATOR'S MANUAL, THE TG-121T CO2 SENSOR AUTOMATICALLY PERFORMS CALIBRATION ONCE PER MINUTE DURING THE FIRST TEN MINUTES OF OPERATION AND ONCE EVERY THREE MINUTES AFTER THAT. MEASUREMENT MIGHT NOT BE PERFORMED CORRECTLY UNTIL SEVERAL MINUTES AFTER WEARING THE CO2 SENSOR KIT BECAUSE THE TEMPERATURE OF THE SENSOR IS NOT YET STABLE AND THE WAVEFORM DRIFTS. FROM THE INFORMATION PROVIDED BY THE CUSTOMER, THE FREQUENCY OF CALIBRATION DOES NOT APPEAR TO EXCEED DEVICE SPECIFICATIONS. THE REPORTED MEASUREMENT INACCURACY MAY BE ATTRIBUTED TO THE FOLLOWING CAUSES, AS PER OPERATOR'S MANUAL: - NASAL TUBE IS NOT PROPERLY INSERTED - SIMULTANEOUS USE WITH ANESTHETIC GAS - SEVERAL MINUTES AFTER WEARING TUBE - RAPID TEMPERATURE CHANGE - HIGH OR LOW TEMPERATURE ENVIRONMENT - HIGH OR LOW PRESSURE ENVIRONMENT - USE OF A NEBULIZER - USE OF AN OXYGEN MASK - USE OF AN OXYGEN CANNULA DETAILS ON THE EXTENT OF TROUBLESHOOTING PERFORMED WAS NOT PROVIDED. THE CO2 SENSOR KIT CAN BE STERILIZED A MAXIMUM OF 20 TIMES. THE NASAL ADAPTER AND AIRWAY ADAPTER CAN BE STERILIZED ONLY ONCE AND BEFORE USE. CUSTOMER IS ADVISED TO NOT USE AN AIRWAY ADAPTER OR NASAL ADAPTER WHICH IS PAST THE EXPIRATION DATE. THE CO2 SENSOR AND CO2 ADAPTER CAN BE REPLACED SEPARATELY. UNKNOWN WHETHER THE CABLE WAS IN USE PAST ITS EXPECTED LIFESPAN. REVIEW OF DEVICE SAP HISTORY FOUND NO FURTHER ISSUES RELATING TO TG-920P CABLES. REVIEW OF TICKETS OPENED AT USER FACILITY FOUND NO OTHER TICKETS OPENED RELATING TO ISSUES WITH TG-920P CABLES OR CALIBRATION. SIMILAR TICKETS REVIEW USING KEYWORDS "TG-920P CALIBRATION" OR "TG-920P MEASUREMENT" FOUND NO RELATED ISSUES REPORTED AT OTHER USER FACILITIES. NO ADVERSE TREND IS SUSPECTED FOR THIS ISSUE. FROM THE INFORMATION AVAILABLE, AND AS THE TG-920P CABLE WAS NOT RETURNED, THE ROOT CAUSE COULD NOT BE CONFIRMED. THIS ISSUE IS NOT SUSPECTED TO BE CAUSED BY A DEFICIENCY OF THE BSM OR ITS DESIGN. ADDITIONAL INFORMATION: B4. DATE OF THIS REPORT. D11. CONCOMITANT MEDICAL PRODUCTS. F6. DATE USER FACILITY/IMPORTER BECAME AWARE OF THE EVENT. F7. TYPE OF REPORT. F11. DATE REPORT SENT TO FDA. F13. DATE REPORT SENT TO MANUFACTURER. G4. DATE RECEIVED BY MANUFACTURER. G7. TYPE OF REPORT. H2. IF FOLLOW-UP, WHAT TYPE? ADDITIONAL INFORMATION. H3. DEVICE EVALUATED BY MANUFACTURER? H6. EVENT PROBLEM AND EVALUATION CODES. H10. ADDITIONAL MANUFACTURER NARRATIVE. D11. CONCOMITANT MEDICAL PRODUCTS: THE TG-980P CABLE WAS USED IN CONJUNCTION WITH THE BEDSIDE MONITOR.

    Description of Event or Problem · 0

    THE CUSTOMER REPORTED THAT WHEN USING A TG-920P CABLE ON THE BEDSIDE MONITOR (BSM) KEPT GETTING AN AUTO CALIBRATION THAT WAS THROWING OFF THE MEASUREMENTS AND DRIVING THEM LOWER.

    Additional Manufacturer Narrative · 1

    THE THE CUSTOMER REPORTED THAT WHEN USING A TG-920P CABLE, THE BEDSIDE MONITOR (BSM) KEPT GETTING AN AUTO CALIBRATION THAT WAS THROWING OFF THE MEASUREMENTS AND DRIVING THEM LOWER. THE CUSTOMER ALSO STATED THAT THIS CABLE DOES THE SAME WHEN USED ON ANOTHER MONITOR OF THE SAME TYPE BUT NOT WHEN IN USE ON AN OLDER BSM MODEL. THE TG-920P IS VERIFIED FOR USE ON THE BSM-3000A SERIES MONITORS. THE AUTO CALIBRATION IS SUPPOSED TO OCCUR WHEN THE CABLE IS PLUGGED IN AND THEN AGAIN EVERY SO OFTEN WHEN IN CONTINUOUS USE. THE CUSTOMER WILL ORDER A TG-980P CABLE, WHICH IS OPTIMIZED FOR USE WITH THE 3000-SERIES BSMS, TO RESOLVE THE ISSUE.

    Description of Event or Problem · 1

    THE CUSTOMER REPORTED THAT WHEN USING A TG-920P CABLE THE BEDSIDE MONITOR (BSM) KEPT GETTING AN AUTO CALIBRATION THAT WAS THROWING OFF THE MEASUREMENTS AND DRIVING THEM LOWER.

    Devices

    Seq Brand Generic Product Code Manufacturer Model Lot UDI-DI
    75231 BSM-3572A VITAL SIGN MONITOR MHX NIHON KOHDEN CORPORATION BSM-3572A N/A 04931921113691

    Patients

    Seq Age Sex Outcome Treatment
    1 TG-920P CABLE