BEUDAMED
    FDA Adverse Event Injury Summary report: N

    SMR SHOULDER

    MDR report key: 6933710 · Received October 10, 2017

    Report

    Report Number
    3008021110-2017-00090
    Event Type
    Injury
    Date Received
    October 10, 2017
    Date of Event
    March 16, 2017
    Report Date
    October 31, 2024
    Manufacturer
    LIMACORPORATE S.P.A.
    Product Code
    HSD
    UDI-DI
    08033390000888
    PMA / PMN Number
    K101263
    Adverse Event
    Yes
    Report Source
    Manufacturer report
    Reporter Location
    JA
    Reporter Occupation
    OTHER
    Health Professional
    N

    Narratives

    Additional Manufacturer Narrative · 0

    NO ANOMALIES WERE DETECTED BY CHECKING THE MANUFACTURING CHART OF LOT N. 1516847. THIS IS THE FIRST AND ONLY COMPLAINT RECEIVED BY LIMACORPORATE ON THIS SPECIFIC LOT NUMBER ON A TOTAL OF 35 SMR CEMENTLESS FINNED STEM DIA. 14MM MANUFACTURED WITH THIS LOT NUMBER. THE EXPLANTED STEM WAS NOT RETURNED TO LIMACORPORATE FOR ANALYSIS. ADDITIONALLY, NO X-RAYS WERE PROVIDED, USEFUL FOR A CLINICAL EVALUATION BY A MEDICAL CONSULTANT. BY THE ANALYSIS OF THE AVAILABLE INFORMATION, THE HUMERAL FRACTURE WAS LIKELY CAUSED BY EXCESSIVE STRENGTH WHEN IMPACTING THE REVERSE BODY. IT WAS ALSO REPORTED THAT THE SURGEON INVOLVED CONFIRMED THE CAUSE OF THE BONE FRACTURE WAS RELATED TO EXCESSIVE SUBSIDENCE OF THE HUMERAL STEM DUE TO EXCESSIVE FORCE USED TO CONNECT THE HUMERAL BODY WITH THE STEM. IN CONCLUSION, CONSIDERING THE ANALYSIS OF THE AVAILABLE INFORMATION, WE CLASSIFY THIS COMPLAINT AS SURGICAL FACTOR RELATED. PMS DATA BASED ON LIMACORPORATE PMS DATA, THIS IS THE ONLY SIMILAR CASE OF INTRA-OPERATIVE BONE FRACTURE INVOLVING THE SMR STEMS (FAMILY CODE 1304.15.XXX), THEREFORE WE ESTIMATE AN OCCURRENCE RATE OF ABOUT (B)(4). NO CORRECTIVE ACTIONS NEEDED FOLLOWING THIS COMPLAINT, LIMACORPORATE WILL CONTINUE MONITORING THE MARKET TO PROMPTLY DETECT ANY FURTHER SIMILAR EVENT. NOTE: THE COMPLAINT WAS CLOSED IN 2017, HOWEVER FINAL MDR WAS NOT SUBMITTED DUE TO INTERNAL ERROR. COMPLAINT IS THEREFORE FORMALLY CLOSED TODAY ACCORDING TO THE ANALYSIS PERFORMED AT THE TIME OF CLOSURE.

    Description of Event or Problem · 0

    PATIENT SUFFERED OF OSTEOARTHRITIS AND SO, ON (B)(6) 2017, A SMR ANATOMIC TOTAL WAS IMPLANTED. CONVERSION TO SMR REVERSE WAS DONE ON(B)(6) 2017 DUE ROTATOR CUFF TEAR. DURING THE REVISION SURGERY, THE SURGEON WANTED TO KEEP AND PRESERVE THE CEMENTLESS STEM DIA.14MM BUT, ACCORDING TO THE INFO REPORTED, HE MAY HAVE TAPPED TOO MUCH WITH IMPACTOR WHEN TRYING TO COUPLE STEM AND HUMERAL BODY. EVENTUALLY, AS THEY DID NOT MANAGE TO CONNECT THE HUMERAL BODY WITH THE STEM, IT WAS DECIDED TO REMOVE THE STEM IN PLACE AND REPLACE IT WITH A 16MM STEM. THE INTRA-OPERATIVE X-RAYS THEN SHOWED THAT A DISTAL BONE FRACTURE HAD OCCURRED. IT WAS REPORTED THAT THE PLAN WAS TO OPERATE THE PATIENT AGAIN. EVENT HAPPENED IN JAPAN.

    Additional Manufacturer Narrative · 1

    BY THE EVENT DESCRIPTION, THE REASON FOR REVISION WAS NOT A MALFUNCTION OF THE DEVICES BUT WAS ROTATOR CUFF TEAR, WHICH IS A WELL KNOWN CAUSE OF REVISION FOR SMR ANATOMIC PROSTHESIS (OUR IFU AND SURGICAL TECHNIQUE REPORT THAT THE USE OF SMR ANATOMIC PROSTHESIS IS NOT INDICATED IN CASE OF ROTATOR CUFF TEAR). THEN, AN INTRA-OP HUMERAL FRACTURE OCCURRED DURING THE REVISION OF (B)(6) 2017, WHILE SURGEON WAS TRYING TO IMPACT THE NEW REVERSE HUMERAL BODY ON THE PRE-EXISTING STEM. ALSO FOR THIS INTRA-OP ISSUE, NO INDICATION OF MALFUNCTION OF DEVICES. THE HUMERAL FRACTURE WAS LIKELY CAUSED BY EXCESSIVE STRENGTH WHEN IMPACTING THE REVERSE BODY, MAYBE COMBINED WITH SUBOPTIMAL QUALITY OF PATIENT BONE. IN ANY CASE, NO ANOMALIES WERE DETECTED BY CHECKING THE MANUFACTURING CHART RELATED TO THE LOT# 1516847 (DIA.14 MM STEM WHICH WAS THEN REPLACED WITH A DIA.16 MM). THIS IS THE FIRST AND ONLY COMPLAINT RECEIVED BY LIMA CORPORATE ON THIS SPECIFIC LOT# ON A TOTAL OF 35 SMR CEMENTLESS FINNED STEM DIA. 14 MM MANUFACTURED WITH THIS LOT#. WE WILL PROBABLY RECEIVE X-RAYS ON THIS CASE AND SEND A FINAL MDR ONCE THE INVESTIGATION WILL BE CONCLUDED.

    Description of Event or Problem · 1

    PATIENT SUFFERED OF OSTEOARTHRITIS AND SO, ON (B)(6) 2017, A SMR ANATOMIC TOTAL WAS IMPLANTED. CONVERSION TO SMR REVERSE WAS DONE ON (B)(6) 2017 DUE ROTATOR CUFF TEAR. SURGEON WANTED TO KEEP AND PRESERVE THE CEMENTLESS STEM DIA.14 MM (SAME SIZE OF THE ONE IMPLANTED DURING THE PRIMARY SURGERY) BUT, ACCORDING TO THE INFO REPORTED, HE MAY HAVE TAPPED TOO MUCH WITH IMPACTOR WHEN TRYING TO COUPLING STEM AND HUMERAL BODY CAUSING A HUMERAL FRACTURE AROUND THE STEM'S DISTAL PART. AS A CONSEQUENCE, DURING THE CONVERSION TO SMR REVERSE, A 16 MM STEM HAD TO BE IMPLANTED. EVENT HAPPENED IN (B)(6).

    Devices

    Seq Brand Generic Product Code Manufacturer Model Lot UDI-DI
    717365 SMR SHOULDER FINNED HUMERAL STEMS - 80MM (TI6AL4V) DIA.14MM HSD LIMACORPORATE S.P.A. 1304.15.140 1516847 08033390000888

    Patients

    Seq Age Sex Outcome Treatment
    1 NA Unknown Required Intervention