BEUDAMED
    FDA Adverse Event Malfunction Summary report: N

    WARMER DRAPE

    MDR report key: 6677829 · Received June 29, 2017

    Report

    Report Number
    8043817-2017-00016
    Event Type
    Malfunction
    Date Received
    June 29, 2017
    Date of Event
    June 6, 2017
    Report Date
    June 6, 2017
    Manufacturer
    MICROTEK DOMINICANA, S.A.
    Product Code
    LHC
    UDI-DI
    00748426108800
    PMA / PMN Number
    K142173
    Product Problem
    Yes
    Report Source
    Manufacturer report
    Reporter Location
    IL, US
    Reporter Occupation
    OTHER

    Narratives

    Additional Manufacturer Narrative · 1

    TWO SAMPLES WERE RECEIVED ON JUNE 9, 2017. BOTH DRAPES WERE OPENED AND OUT OF PACKAGES. ONE DRAPE FROM LOT D170611 AND ONE FROM LOT D170941 WERE RECEIVED. THERE APPEARED TO BE HOLES IN THE TOP SIDE OF THE DRAPE - ONE IN EACH OF THE CORNERS WHERE THE POCKET IS FORMED OVER THE FOAM PILLOW. ONE OF THE SAMPLES WAS EVALUATED AND NO WATER WAS FOUND UNDER THE DRAPE OR LEAKING DOWN THE DRAPE. WATER DID NOT LEAK INTO THE POCKET WHERE THE PILLOW SITS. THERE ARE SMALL PLEATS IN THE SEAL AROUND THE PILLOW BUT THEY ARE NOT HOLES OR CHANNELS FOR WATER TO FLOW THROUGH. THE SAMPLES WERE SENT TO THE MANUFACTURING FACILITY WHERE IT WAS CONFIRMED THAT THE PRODUCT WAS MANUFACTURED ACCORDING TO SPECIFICATION. THE ACTUAL DRAPE USED IN THE PROCEDURE WAS DISCARDED BY THE HOSPITAL AND NOT AVAILABLE FOR REVIEW. THE DHR FOR LOT D170611 WAS REVIEWED AND IT WAS CONFIRMED THAT THIS LOT HAS (B)(4) UNITS THAT WERE MANUFACTURED ON COMBINED SHIFTS FROM 03/03/17 TO 03/05/17 AND THAT NO DEFECTS WERE REPORTED DURING THE QUALITY INSPECTIONS. THE MANUFACTURING PROCESS WAS REVIEWED AND IT WAS CONFIRMED THAT THE OPERATORS WERE PERFORMING THE MANUFACTURING PROCESS ACCORDING TO SPECIFICATION. UPON COMPLETION OF THE INVESTIGATION IT WAS CONCLUDED THAT THE ROOT CAUSE FOR THIS EVENT IS RELATED TO USER PERCEPTION. NO ACTIONS ARE BEING TAKEN AT THIS TIME SINCE THE NON CONFORMANCE COULD NOT BE CONFIRMED.

    Description of Event or Problem · 1

    FOLLOWING A 6 HOUR ROBOTIC UROLOGY PROCEDURE, AN END USER DISCOVERED A LOT OF FLUID UNDERNEATH THE DRAPE AND IN THE WARMER BASIN. UPON FURTHER INVESTIGATION OF THE DRAPE, THE END USER DISCOVERED TWO SMALL PUNCTURE HOLES ON THE TOP-SIDE OF THE DRAPE WHICH THEY BELIEVE CAUSED THE DRAPE TO LEAK FLUID. IN ADDITION, THEY ALSO NOTICED TWO SLITS ON THE UNDER-SIDE OF THE DRAPE THAT ARE ALSO OF CONCERN. FOLLOWING THE PROCEDURE, THE STAFF WENT TO INVESTIGATE THEIR REMAINING SUPPLY AND FOUND THE SAME ISSUES IN THE NEXT THREE UNITS THEY OPENED AND IT WASN'T UNTIL THE FOURTH UNIT THEY FOUND WHAT APPEARED TO BE AN ACCEPTABLE DRAPE WITHOUT THE ISSUES REPORTED. NO PATIENT INJURY OR TREATMENT WAS REPORTED FOR THE INCIDENT

    Devices

    Seq Brand Generic Product Code Manufacturer Model Lot UDI-DI
    456796 WARMER DRAPE FLUID WARMING AND SLUSH DRAPES LHC MICROTEK DOMINICANA, S.A. ORS-400 D170611 00748426108800

    Patients

    Seq Age Sex Outcome Treatment
    1