BEUDAMED
    FDA Adverse Event Injury Summary report: N

    NAVIO SURGICAL SYSTEM

    MDR report key: 6449688 · Received March 31, 2017

    Report

    Report Number
    3010266064-2017-00003
    Event Type
    Injury
    Date Received
    March 31, 2017
    Date of Event
    December 29, 2016
    Report Date
    September 27, 2022
    Manufacturer
    BLUE BELT TECHNOLOGIES, INC.
    Product Code
    OLO
    PMA / PMN Number
    K160537
    Removal / Correction Number
    Z-1634-2020
    Adverse Event
    Yes
    Product Problem
    Yes
    Report Source
    Manufacturer report
    Reporter Location
    MN, US
    Reporter Occupation
    OTHER
    Health Professional
    N

    Narratives

    Additional Manufacturer Narrative · 0

    SMITH & NEPHEW HAS RE-ASSESSED THIS COMPLAINT IN ACCORDANCE TO THE PROVISIONS OF 21 C.F.R. §803.50 AND DEEMED THIS EVENT REPORTABLE AS A MDR REPORTABLE EVENT. WE ARE SUBMITTING ONE (1) INITIAL, 30 DAY REPORT, MEDWATCH FDA FORM 3500A. DISCLAIMER: SMITH & NEPHEW IS SUBMITTING THE ABOVE REPORT TO COMPLY WITH 21 C.F.R. PART 803, THE MEDICAL DEVICE REPORTING REGULATION. THE REPORT IS BASED UPON INFORMATION OBTAINED BY SMITH & NEPHEW, WHICH THE COMPANY MAY NOT HAVE BEEN ABLE TO INVESTIGATE OR VERIFY PRIOR TO THE DATE THE REPORT WAS REQUIRED BY FDA. THIS REPORT DOES NOT CONSTITUTE AN ADMISSION THAT THE DEVICE, SMITH & NEPHEW, OR ITS EMPLOYEES, CAUSED OR CONTRIBUTED TO THE EVENT DESCRIBED IN THIS REPORT. NOR DOES THIS REPORT REFLECT A CONCLUSION BY FDA, SMITH & NEPHEW OR ITS EMPLOYEES, THAT THE REPORT CONSTITUTES AN ADMISSION THAT THE DEVICE, SMITH & NEPHEW OR ITS EMPLOYEES CAUSED OR CONTRIBUTED TO THE EVENT DESCRIBED IN THIS REPORT. CORRECTION: B1 AND H1 WERE UPDATED TO REPORT TYPE ADVERSE EVENT. CORRECTION. B5 WAS UPDATED.

    Additional Manufacturer Narrative · 0

    THE DEVICE, USED IN TREATMENT, WAS RETURNED FOR A PRIOR INVESTIGATION AND WAS DISCARDED. DHR REVIEW FOUND THAT NO CONDITIONS THAT COULD CONTRIBUTE TO THE REPORTED EVENT WERE FOUND. THE REPORTED PRODUCT MET MANUFACTURING SPECIFICATIONS PRIOR TO BEING RELEASED FOR DISTRIBUTION. A COMPLAINT HISTORY REVIEW FOUND SIMILAR REPORTS, THIS ISSUE WILL CONTINUE TO BE MONITORED. THE SURGICAL TECHNIQUE GUIDE RELEASED AT THE TIME OF THE COMPLAINT PROVIDES INSTRUCTIONS FOR USING THE TISSUE PROTECTOR. SPECIFICALLY, THE GUIDE DOES PROVIDE INSTRUCTION ON HOW TO PREPARE THE BONE PIN INSERTION LOCATION ON THE PATIENT AND HOW TO INSERT THE TISSUE PROTECTOR WITHIN THAT LOCATION. THE COMPLAINT DOES NOT SUGGEST THAT THE USER DEVIATED FROM THESE INSTRUCTIONS. MOREOVER, AS PART OF THE FUNCTIONAL EVALUATION THAT REPLICATED THE ISSUE, THE TEST OPERATOR FOLLOWED THE INSTRUCTIONS PROVIDED IN THE SURGICAL TECHNIQUE GUIDE AND EXPERIENCED THE BONE PIN GETTING STUCK IN THE TISSUE PROTECTOR. ACCORDINGLY, PRODUCT LABELING HAS BEEN RULED OUT AS A CAUSE OF THE COMPLAINT. THIS FAILURE IS AN IDENTIFIED FAILURE MODE WITHIN THE RISK FILE. WE COULD NOT CONFIRM IF THERE WAS A RELATIONSHIP ESTABLISHED BETWEEN THE REPORTED EVENT AND THE DEVICE. PHOTOS OF THE DEVICE WERE NOT PROVIDED FOR EVALUATION AND THE DEVICE WAS DISCARDED AFTER A PRIOR INVESTIGATION. HOWEVER, BASED ON PRIOR COMPLAINTS RECEIVED IT IS LIKELY THAT THE EVENT OCCURRED DUE TO THE REPORTED FAILURE. THE MALFUNCTION IS DUE TO A DESIGN ISSUE DUE TO THE INNER DIAMETER OF THE TISSUE PROTECTOR LUMEN DIAMETER RELATIVE TO THE MAJOR DIAMETER OF THE BONE PIN. BINDING OF THE BONE SCREW TO THE TISSUE PROTECTOR IS PRIMARILY DUE TO TISSUE BEING WRAPPED AROUND THE THREADS. HOWEVER, INITIAL PIN MISALIGNMENT AND BENDING OF THE PIN ARE ALSO CONTRIBUTING FACTORS. HHE- 2020-12-PL AND CAPA 200017 WERE OPENED AS CORRECTIVE ACTIONS TO ADDRESS THIS ISSUE.

    Description of Event or Problem · 0

    IT WAS REPORTED THAT DURING A SURGICAL PROCEDURE, A BONE SCREW HAD BECOME BOUND TO THE TISSUE PROTECTOR CANNULA DUE TO A SMALL AMOUNT OF SOFT TISSUE BEING PULLED INTO THE TISSUE PROTECTOR DURING PLACEMENT OF THE BONE SCREW ON THE TIBIA. TO CORRECT THE PROBLEM THE SURGEON USED A RECIPROCATING SAW TO CUT ONE CANNULA OFF AND WAS THEN ABLE TO TWIST OUT THE SECOND SCREW AND CANNULA, RELEASING THE DEVICE WITH NO PARTS LEFT BEHIND IN THE PATIENT. THIS CORRECTION RESULTED IN A FEW MINUTES DELAY IN THE PROCEDURE. THE SURGEON WAS ABLE TO COMPLETE THE CASE USING A BACKUP DEVICE.

    Additional Manufacturer Narrative · 1

    SMITH & NEPHEW HAS RE-ASSESSED THIS COMPLAINT IN ACCORDANCE TO THE PROVISIONS OF 21 C.F.R. §803.50 AND DEEMED THIS EVENT REPORTABLE AS A MDR REPORTABLE EVENT. WE ARE SUBMITTING ONE (1) INITIAL, 30 DAY REPORT, MEDWATCH FDA FORM 3500A.

    Description of Event or Problem · 1

    A BONE SCREW HAD BECOME BOUND TO THE TISSUE PROTECTOR CANNULA DUE TO A SMALL AMOUNT OF SOFT TISSUE BEING PULLED INTO THE TISSUE PROTECTOR DURING PLACEMENT OF THE BONE SCREW ON THE TIBIA. TO CORRECT THE PROBLEM THE SURGEON USED A RECIPROCATING SAW TO CUT ONE CANNULA OFF AND WAS THEN ABLE TO TWIST OUT THE SECOND SCREW AND CANNULA, RELEASING THE DEVICE WITH NO PARTS LEFT BEHIND IN THE PATIENT. THIS CORRECTION RESULTED IN A FEW MINUTES DELAY IN THE PROCEDURE AND NO PERMANENT IMPAIRMENT OF A BODY FUNCTION OR STRUCTURE, HENCE NO SERIOUS INJURY. THE SURGEON WAS ABLE TO COMPLETE THE CASE USING A BACKUP DEVICE.

    Devices

    Seq Brand Generic Product Code Manufacturer Model Lot UDI-DI
    231207 NAVIO SURGICAL SYSTEM NAVIO SURGICAL SYSTEM OLO BLUE BELT TECHNOLOGIES, INC.

    Patients

    Seq Age Sex Outcome Treatment
    1 67 YR Male Required Intervention