BEUDAMED
    FDA Adverse Event Malfunction Summary report: N

    CONQUEST 40 PTA BALLOON DILATATION CATHETER

    MDR report key: 6064959 · Received October 28, 2016

    Report

    Report Number
    2020394-2016-01016
    Event Type
    Malfunction
    Date Received
    October 28, 2016
    Date of Event
    August 30, 2016
    Report Date
    September 1, 2016
    Manufacturer
    BARD PERIPHERAL VASCULAR, INC.
    Product Code
    DQY
    UDI-DI
    00801741060618
    PMA / PMN Number
    K120660
    Product Problem
    Yes
    Report Source
    Manufacturer report
    Reporter Location
    NC, US
    Reporter Occupation
    PHYSICIAN

    Narratives

    Additional Manufacturer Narrative · 1

    NO MEDICAL RECORDS AND NO MEDICAL IMAGES WERE PROVIDED TO THE MANUFACTURER. THE LOT NUMBER FOR THE DEVICE WAS PROVIDED. THE DEVICE HISTORY RECORDS ARE CURRENTLY UNDER REVIEW. THE DEVICE WAS RETURNED TO THE MANUFACTURER FOR EVALUATION. THE INVESTIGATION OF THE REPORTED EVENT IS CURRENTLY UNDERWAY. THE INFORMATION PROVIDED BY BARD REPRESENTS ALL OF THE KNOWN INFORMATION AT THIS TIME. DESPITE GOOD FAITH EFFORTS TO OBTAIN ADDITIONAL INFORMATION, THE COMPLAINANT / REPORTER WAS UNABLE OR UNWILLING TO PROVIDE ANY FURTHER PATIENT, PRODUCT, OR PROCEDURAL DETAILS TO BARD.

    Additional Manufacturer Narrative · 1

    MANUFACTURING REVIEW: A MANUFACTURING REVIEW WAS CONDUCTED AND THERE WAS NOTHING FOUND TO INDICATE THERE WAS A MANUFACTURING RELATED CAUSE FOR THIS EVENT. THE LOT MET ALL RELEASE CRITERIA. VISUAL/MICROSCOPIC INSPECTION: THE BALLOON SIZE FOR THIS PRODUCT IS PRINTED ON THE BALLOON HUB OF THE CATHETER AND IDENTIFIED THE RETURNED SAMPLE AS A 9MM X 8CM BALLOON. NO FIBER DISTURBANCE WAS NOTED TO THE BALLOON. THE BALLOON WAS RETURNED PARTIALLY INFLATED. NO ANOMALIES WERE NOTED TO THE DEVICE AT THIS TIME. FUNCTIONAL/PERFORMANCE EVALUATION: THE PATENCY OF THE GUIDEWIRE LUMEN WAS THEN TESTED USING AN IN-HOUSE 0.035¿ GUIDEWIRE, AND IT PASSED WITH NO ISSUES. THE INFLATION HUB WAS THEN CONNECTED TO AN IN-HOUSE INFLATION DEVICE AND AN ATTEMPT WAS MADE TO INFLATE THE BALLOON WITH WATER. UPON INFLATION, WATER WAS OBSERVED COMING OUT THE DISTAL TIP AT THE LOCATION WHERE THE GUIDEWIRE ENTERS THE TIP, INDICATING THAT THE WATER WAS ENTERING THE INNER POLYIMIDE TUBING. THE BALLOON FIBERS WERE THEN STRIPPED AND THE BALLOON WAS REMOVED FROM THE CATHETER. THE INNER POLYIMIDE WAS EXAMINED TO DETERMINE WHERE THE LEAK WAS COMING FROM. THE POLYIMIDE TUBING WAS FLUSHED WITH WATER AND WATER WAS OBSERVED TO BE LEAKING FROM A HOLE IN THE POLYIMIDE LOCATED 10.9CM FROM THE DISTAL TIP. THE LOCATION OF THE HOLE WAS EXAMINED UNDER MICROSCOPIC MAGNIFICATION AND THE EDGES ARE NOTED TO BE JAGGED. NO DAMAGE TO THE BALLOON WAS NOTED AT THE LOCATION OF THE HOLE IN THE INNER POLYIMIDE. MEDICAL RECORDS REVIEW: MEDICAL RECORDS WERE NOT PROVIDED; THEREFORE, A REVIEW COULD NOT BE PERFORMED. IMAGE/PHOTO REVIEW: IMAGES/PHOTOS WERE NOT PROVIDED; THEREFORE, A REVIEW COULD NOT BE PERFORMED. CONCLUSION: THE COMPLAINT INVESTIGATION IS UNCONFIRMED FOR MATERIAL RUPTURE AS NO RUPTURES WERE PRESENT ON THE BALLOON. THE INVESTIGATION IS CONFIRMED FOR HOLE IN MATERIAL AS A HOLE WAS WERE PRESENT ON THE INNER POLYIMIDE TUBING, RESULTING IN A LEAK FROM THE DISTAL TIP DURING INFLATION. THE ROOT CAUSE FOR THE LEAK FROM THE DISTAL TIP IS MANUFACTURING RELATED AS THERE WAS A HOLE PRESENT IN THE INNER POLYIMIDE TUBING. AS NO DAMAGE WAS PRESENT TO THE OUTER BALLOON, THE HOLE IN THE INNER POLYIMIDE INDICATE THAT THEY LIKELY ORIGINATED DURING MANUFACTURING. HOWEVER, THE EXACT CAUSE FOR THE HOLE IN THE POLYIMIDE IS UNKNOWN. LABELING REVIEW: THE CURRENT IFU (INSTRUCTIONS FOR USE) STATES: WARNINGS: - DO NOT EXCEED THE RBP RECOMMENDED FOR THIS DEVICE. BALLOON RUPTURE MAY OCCUR IF THE RBP RATING IS EXCEEDED. TO PREVENT OVER PRESSURIZATION, USE OF A PRESSURE MONITORING DEVICE IS RECOMMENDED. - WHEN THE CATHETER IS EXPOSED TO THE VASCULAR SYSTEM, IT SHOULD BE MANIPULATED WHILE UNDER HIGH-QUALITY FLUOROSCOPIC OBSERVATION. DO NOT ADVANCE OR RETRACT THE CATHETER UNLESS THE BALLOON IS FULLY DEFLATED. IF RESISTANCE IS MET DURING MANIPULATION, DETERMINE THE CAUSE OF THE RESISTANCE BEFORE PROCEEDING. APPLYING EXCESSIVE FORCE TO THE CATHETER CAN RESULT IN TIP BREAKAGE OR BALLOON SEPARATION. PRECAUTIONS: - IF RESISTANCE IS FELT DURING POST PROCEDURE WITHDRAWAL OF THE CATHETER THROUGH THE INTRODUCER SHEATH, DETERMINE IF CONTRAST IS TRAPPED IN THE BALLOON WITH FLUOROSCOPY. IF CONTRAST IS PRESENT, PUSH THE BALLOON OUT OF THE SHEATH AND THEN COMPLETELY EVACUATE THE CONTRAST BEFORE PROCEEDING TO WITHDRAW THE BALLOON - IF RESISTANCE IS STILL FELT DURING POST PROCEDURE WITHDRAWAL OF THE CATHETER, IT IS RECOMMENDED TO REMOVE THE BALLOON CATHETER AND GUIDEWIRE/INTRODUCER SHEATH AS A SINGLE UNIT. THE INFORMATION PROVIDED BY BARD REPRESENTS ALL OF THE KNOWN INFORMATION AT THIS TIME. DESPITE GOOD FAITH EFFORTS TO OBTAIN ADDITIONAL INFORMATION, THE COMPLAINANT / REPORTER WAS UNABLE OR UNWILLING TO PROVIDE ANY FURTHER PATIENT, PRODUCT, OR PROCEDURAL DETAILS TO BARD.

    Description of Event or Problem · 1

    IT WAS REPORTED THAT THE PTA BALLOON CATHETER RUPTURED AT 20 ATM DURING THE FIRST INFLATION IN A CEPHALIC VEIN STENOSIS. REPORTEDLY, THE BALLOON CATHETER WAS EXCHANGED OVER THE GUIDEWIRE WITH ANOTHER BALLOON CATHETER AND THE PROCEDURE WAS COMPLETED. THERE WAS NO REPORTED PATIENT INJURY.

    Description of Event or Problem · 1

    IT WAS REPORTED THAT THE PTA BALLOON CATHETER RUPTURED AT 20 ATM DURING THE FIRST INFLATION IN A CEPHALIC VEIN STENOSIS. REPORTEDLY, THE BALLOON CATHETER WAS EXCHANGED OVER THE GUIDEWIRE WITH ANOTHER BALLOON CATHETER AND THE PROCEDURE WAS COMPLETED. THERE WAS NO REPORTED PATIENT INJURY.

    Devices

    Seq Brand Generic Product Code Manufacturer Model Lot UDI-DI
    714839 CONQUEST 40 PTA BALLOON DILATATION CATHETER PTA BALLOON DILATATION CATHETER DQY BARD PERIPHERAL VASCULAR, INC. REAN1402 00801741060618

    Patients

    Seq Age Sex Outcome Treatment
    1 40 YR