BEUDAMED
    FDA Adverse Event Malfunction Summary report: N

    ARCHITECT TOTAL T3

    MDR report key: 4112289 · Received September 23, 2014

    Report

    Report Number
    3005094123-2014-00060
    Event Type
    Malfunction
    Date Received
    September 23, 2014
    Date of Event
    August 14, 2014
    Report Date
    August 17, 2014
    Manufacturer
    A.I.D.D LONGFORD
    Product Code
    CDP
    PMA / PMN Number
    K983439
    Removal / Correction Number
    3005094123-09/16/14-001-
    Product Problem
    Yes
    Report Source
    Manufacturer report
    Reporter Location
    ID
    Reporter Occupation
    HEALTH PROFESSIONAL

    Narratives

    Additional Manufacturer Narrative · 1

    COMPLETE CORRECTION AND OR REMOVAL REPORTING NUMBER IS 3005094123-09/16/14-001-R. (B)(4). FURTHER ANALYSIS OF THE DATA INDICATES THE REDUCED RLU VALUES ARE EVIDENT FOR MICROPARTICLE BOTTLES SEQUENTIALLY NUMBERED FROM 13835 ONWARDS. THESE BOTTLES ARE DERIVED FROM THE LATTER (B)(4) OF THE MICROPARTICLE FILL (TOTAL LOT SIZE: (B)(4) BOTTLES). THE INVESTIGATION HAS DETERMINED THAT (B)(4) OF THE TWO IMPACTED REAGENT LOTS (38901UI00 AND 38901UI01) MAY EXHIBIT LOWER RELATIVE LIGHT UNITS (RLUS) THAN EXPECTED, WHICH IN TURN MAY RESULT IN CONTROLS OUT OF RANGE OR PATIENT RESULTS HIGHER THAN EXPECTED. INTERNAL TESTING OF FILE SAMPLES CONFIRMED THE CUSTOMERS OBSERVATION AND IT WAS DETERMINED THAT THE REDUCTION IN RLUS WAS RELATED TO THE EXISTENCE OF REDUCED PERCENT SOLIDS FROM THIS PORTION OF THE FILL. FOUR POSSIBLE UTILISATION SCENARIOS WITH THE IMPACTED REAGENT MAY BE OBSERVED: 1-THE CUSTOMER CALIBRATES WITH A NOMINAL SOLIDS BOTTLE AND GENERATES RESULTS FROM THE CURVE USING A NOMINAL SOLIDS BOTTLE. NO IMPACT WILL OCCUR. 2-THE CUSTOMER CALIBRATES WITH A NOMINAL SOLIDS BOTTLE AND LATER GENERATES RESULTS FROM THAT CURVE USING A LOW SOLIDS BOTTLE. THIS WILL RESULT IN A POSITIVE BIAS WHEN COMPARED TO SCENARIO 1. 3-THE CUSTOMER CALIBRATES WITH A LOW SOLIDS BOTTLE AND LATER GENERATES RESULTS FROM THAT CURVE USING A NOMINAL SOLIDS BOTTLE. THIS WILL RESULT IN A NEGATIVE BIAS WHEN COMPARED TO SCENARIO 1. 4-THE CUSTOMER CALIBRATES WITH A LOW SOLIDS BOTTLE AND GENERATES RESULTS FROM THAT CURVE USING A LOW SOLIDS BOTTLE. THIS WILL RESULT IN A POSITIVE BIAS WHEN COMPARED TO SCENARIO1. THE CORRECTION ACTIONS INCLUDED: 1-INTERNAL INTERIM ACTION: ADDITIONAL VERIFICATIONS HAVE BEEN INTRODUCED DURING FILLING PROCESS TO RECORD INFORMATION SUCH AS ACTUAL BOTTLE NUMBERS TESTED AND MIX SPEEDS PRIOR TO TRANSFER. 2-QUALITY HOLD FOR THE AFFECTED REAGENT LOTS WAS ISSUED. 3-A FIELD SAFETY CORRECTIVE ACTION (FSCA) IS PROPOSED FOR ISSUE TO ALL CUSTOMERS TO INFORM THEM OF THE EVENT AND INSTRUCT THEM TO: DISCONTINUE USAGE OF ARCHITECT TT3 REAGENT, LN 7K64-20, LOT 38901UI00 AND LN 7K64-25, LOT 38901UI01. (ALTERNATE IS TO ONLY DESTROY IMPACTED BOTTLES BASED ON SERIAL NUMBERS). REVIEW PATIENT RESULTS GENERATED USING THE LOTS ABOVE TO ENSURE ALIGNMENT TO OVERALL CLINICAL STATUS. 4-A QUALITY DIRECTIVE (QD) WITH Q&A WILL BE PROVIDED TO CALL REGISTRATION TO SUPPORT THEM WITH ANY QUERIES IMPACTED CUSTOMERS MAY HAVE. REPLACEMENT INVENTORY ARE AVAILABLE (7K64-20 AND 7K64-25; LOT 41919UI00; EXP: 20-MAY-2015, 7K64-30; LOT 41918UI01; EXP: 20-MAY-2015).

    Description of Event or Problem · 1

    THE CUSTOMER STATED THAT THE ARCHITECT ANALYZER GENERATED CONTROLS OUT OF RANGE(OOR) HIGH FOR TOTAL T3. THE CUSTOMER CHANGED THE REAGENT (SAME LOT), PERFORMED A CALIBRATION, AND ALL CONTROLS WERE WITH IN RANGE. THE CUSTOMER ALSO STATED THAT WHILE THEY WERE HAVING THIS ISSUE THEY GENERATED 6 PATIENT RESULTS. RESULTS PROVIDED WERE: SID0 (B)(6) = 0.86 / 0.76; SID (B)(6) = 1.17; SID (B)(6) = 0.95; SID (B)(6) = 1.25; SID (B)(6) = 0.88; SID (B)(6) = 1.52 / 1.02NG/ML (ALL WITHIN NORMAL RANGE). THERE WAS NO ADDITIONAL PATIENT INFORMATION PROVIDED. THERE WAS NO REPORTED IMPACT TO PATIENT MANAGEMENT.

    Devices

    Seq Brand Generic Product Code Manufacturer Model Lot UDI-DI
    592096 ARCHITECT TOTAL T3 TOTAL T3 CDP A.I.D.D LONGFORD 38901UI00

    Patients

    Seq Age Sex Outcome Treatment
    1 ARCHITECT I1000SR ANALYZER, LIST # 01L86-01,| SERIAL # (B)(4)