BEUDAMED
    FDA Adverse Event Injury Summary report: N

    IMP,TSV,4.7,8,MTX,MG

    MDR report key: 12013412 · Received June 16, 2021

    Report

    Report Number
    0002023141-2021-01555
    Event Type
    Injury
    Date Received
    June 16, 2021
    Date of Event
    April 1, 2021
    Report Date
    October 7, 2021
    Manufacturer
    ZIMMER DENTAL
    Product Code
    DZE
    UDI-DI
    00889024020030
    PMA / PMN Number
    K101977
    Adverse Event
    Yes
    Report Source
    Manufacturer report
    Reporter Location
    IN
    Reporter Occupation
    DENTIST

    Narratives

    Additional Manufacturer Narrative · 0

    SIMILAR COMPLAINTS FOR THE INABILITY TO ACHIEVE PRIMARY STABILITY (UNABLE TO PLACE IMPLANT INTO OSTEOTOMY) HAVE BEEN PREVIOUSLY INVESTIGATED. REFER TO ATTACHED SUMMARY INVESTIGATION. VISUAL AND DIMENSIONAL EVALUATIONS OF THE PREVIOUSLY RETURNED PRODUCT HAVE NOT IDENTIFIED OR SUGGESTED MANUFACTURING NON-CONFORMANCES. WHILE NON-CONFORMANCES WERE IDENTIFIED FOR SOME LOTS DURING MANUFACTURING RECORDS REVIEWS, THE DOCUMENTED DISPOSITION ACTIONS FOR EACH HAVE NOT SUGGESTED THE LIKELY RELEASE OF NON-CONFORMING PRODUCT. TO DATE, ALL COMPLAINT DATA WAS FOUND TO BE CONFORMING AND DID NOT MEET CAPA/HHE/D/IE ESCALATION. THEREFORE, THERE WERE NO COMPLAINTS WHICH CONFIRMED A MANUFACTURING OR DESIGN RELATED ISSUE CAUSED OR CONTRIBUTED TO THE REPORTED EVENT. DHR REVIEW WAS COMPLETED FOR THE SUBJECT LOT NUMBER (1230080). IT WAS CONFIRMED THAT ALL OPERATIONS AND INSPECTIONS WERE EXECUTED AS PER APPLICABLE PROCEDURE. NO DEVIATIONS OR NON-CONFORMANCES, WHICH COULD HAVE CAUSED OR CONTRIBUTED TO THE REPORTED EVENT WERE NOTED AS PART OF THE DHR. LOTS WERE INSPECTED AND PASSED ALL ACCEPTANCE CRITERIA BY QA. COMPLAINT HISTORY REVIEW WAS PERFORMED FOR THE REPORTED LOT NUMBER (1230080) FOR SIMILAR EVENTS AND 2 OTHER COMPLAINTS WERE IDENTIFIED. AS DOCUMENTED IN THE SUMMARY INVESTIGATION, CONTRIBUTING FACTORS FOR THE REPORTED EVENT LIKELY EXIST OUTSIDE OF ZIMMER BIOMET CONTROL, INCLUDING THOSE RELATED TO PATIENT BIOLOGICAL FACTORS/CONDITION AND SURGICAL TECHNIQUE. THE FOLLOWING SECTIONS HAVE BEEN UPDATED: G6: CHECKED "FOLLOW-UP." H3: CHANGED "NO" TO "YES."

    Description of Event or Problem · 0

    NO FURTHER EVENT INFORMATION AVAILABLE AT THE TIME OF THIS REPORT.

    Additional Manufacturer Narrative · 1

    ZIMMER BIOMET (B)(4). PMA/510K: K101880. A SUMMARY INVESTIGATION HAS BEEN COMPLETED FOR LACK OF PRIMARY STABILITY EVENTS THAT DO NOT ALLEGE A DEFICIENCY WITH THE IMPLANT AND IDENTIFIED THAT THE REPORTED EVENT IS LIKELY DUE TO BIOLOGICAL FACTORS WHICH HAVE AN ADVERSE EFFECT ON IMPLANT STABILITY OR IS RELATED TO SURGICAL TECHNIQUE AND INSERTION TORQUE. DUE TO A WIDE RANGE OF EXTERNAL (NON-DESIGN/ NON-MANUFACTURING RELATED), IDENTIFYING A DEFINITIVE ROOT CAUSE IS GENERALLY NOT POSSIBLE. SHOULD ADDITIONAL INFORMATION BE RECEIVED WHICH INDICATES THAT THE DEVICE MAY HAVE CAUSED OR CONTRIBUTED TO THE EVENT, AN ADDITIONAL REPORT WILL BE SUBMITTED.

    Description of Event or Problem · 1

    DR. INDICATED LACK OF PRIMARY. LOSS OF PRIMARY STABILITY DURING PLACEMENT. PATIENT WILL RETURN FOR IMPLANT PLACEMENT IN 2 MONTHS. TOOTH SITE 3.

    Devices

    Seq Brand Generic Product Code Manufacturer Model Lot UDI-DI
    906570 IMP,TSV,4.7,8,MTX,MG DENTAL IMPLANT DZE ZIMMER DENTAL TSVTWB8 1230080 00889024020030

    Patients

    Seq Age Sex Outcome Treatment
    1 52 YR Required Intervention