BEUDAMED
    FDA Adverse Event Malfunction Summary report: N

    2.0MM TI MATRIXMANDIBLE LOCKING SCREW SLF-TPNG 12MM

    MDR report key: 10950159 · Received December 4, 2020

    Report

    Report Number
    8030965-2020-09404
    Event Type
    Malfunction
    Date Received
    December 4, 2020
    Report Date
    November 9, 2020
    Manufacturer
    SYNTHES GMBH
    Product Code
    JEY
    UDI-DI
    07611819939776
    PMA / PMN Number
    K063790
    Report Source
    Manufacturer report
    Reporter Location
    JA
    Reporter Occupation
    OTHER HEALTH CARE PROFESSIONAL

    Narratives

    Additional Manufacturer Narrative · 0

    DEPUY SYNTHES IS SUBMITTING THIS REPORT PURSUANT TO THE PROVISIONS OF 21 CFR, PART 803. THIS REPORT MAY BE BASED ON INFORMATION WHICH DEPUY SYNTHES HAS NOT BEEN ABLE TO INVESTIGATE OR VERIFY PRIOR TO THE REQUIRED REPORTING DATE. THIS REPORT DOES NOT REFLECT A CONCLUSION BY FDA, DEPUY SYNTHES OR ITS EMPLOYEES THAT THE REPORT CONSTITUTES AN ADMISSION THAT THE DEVICE, DEPUY SYNTHES, OR ITS EMPLOYEES CAUSED OR CONTRIBUTED TO THE POTENTIAL EVENT DESCRIBED IN THIS REPORT. H3, H6: PART: 04.503.612.01S. LOT: 9790653. MANUFACTURING SITE: BETTLACH. RELEASE TO WAREHOUSE DATE: 19. MAY 2016. EXPIRY DATE: 01. JAN. 2026. A MANUFACTURING RECORD EVALUATION WAS PERFORMED FOR THE FINISHED DEVICE LOT NUMBER, AND NO NON-CONFORMANCES RELATED TO THE REPORTED COMPLAINT CONDITION WERE IDENTIFIED. THIS NON-CONFORMANCE IS NOT RELEVANT TO THE COMPLAINT CONDITION BECAUSE IT WAS DETECTED ON FAULTY PART DURING THE STERILIZATION PROCESS. THE FAILURE PART WAS DISCARDED OF THE LOT. PRODUCT WAS NOT RETURNED AND THEREFORE, NO FURTHER INVESTIGATION IS POSSIBLE. THIS COMPLAINT WILL BE RATED AS CONFIRMED AS THE INVESTIGATION HAS SHOWN THAT THE OBSERVED DAMAGE IS CONSISTENT WITH THE REPORTED COMPLAINT CONDITION. BASED ON THE INFORMATION AVAILABLE, IT HAS BEEN DETERMINED THAT NO CORRECTIVE AND/OR PREVENTATIVE ACTION IS PROPOSED. THIS COMPLAINT WILL BE ACCOUNTED FOR AND MONITORED VIA POST MARKET SURVEILLANCE ACTIVITIES. IF ADDITIONAL INFORMATION IS MADE AVAILABLE, THE INVESTIGATION WILL BE UPDATED AS APPLICABLE. DEVICE WAS USED FOR TREATMENT, NOT DIAGNOSIS. IF INFORMATION IS OBTAINED THAT WAS NOT AVAILABLE FOR THE INITIAL MEDWATCH, A FOLLOW-UP MEDWATCH WILL BE FILED AS APPROPRIATE. DEPUY SYNTHES IS SUBMITTING THIS REPORT PURSUANT TO THE PROVISIONS OF 21 CFR, PART 803. THIS REPORT MAY BE BASED ON INFORMATION WHICH DEPUY SYNTHES HAS NOT BEEN ABLE TO INVESTIGATE OR VERIFY PRIOR TO THE REQUIRED REPORTING DATE. THIS REPORT DOES NOT REFLECT A CONCLUSION BY FDA, DEPUY SYNTHES OR ITS EMPLOYEES THAT THE REPORT CONSTITUTES AN ADMISSION THAT THE DEVICE, DEPUY SYNTHES, OR ITS EMPLOYEES CAUSED OR CONTRIBUTED TO THE POTENTIAL EVENT DESCRIBED IN THIS REPORT. DEVICE WAS USED FOR TREATMENT, NOT DIAGNOSIS. IF INFORMATION IS OBTAINED THAT WAS NOT AVAILABLE FOR THE INITIAL MEDWATCH, A FOLLOW-UP MEDWATCH WILL BE FILED AS APPROPRIATE.

    Additional Manufacturer Narrative · 1

    INITIAL REPORTER IS A SYNTHES SALES REPRESENTATIVE. THE DEVICE WAS RECEIVED, THE INVESTIGATION COULD NOT BE COMPLETED, AND NO CONCLUSION COULD BE DRAWN, AS PRODUCT IS ENTERING THE COMPLAINT SYSTEM. DEVICE WAS USED FOR TREATMENT, NOT DIAGNOSIS. IF INFORMATION IS OBTAINED THAT WAS NOT AVAILABLE FOR THE INITIAL MEDWATCH, A FOLLOW-UP MEDWATCH WILL BE FILED AS APPROPRIATE.

    Description of Event or Problem · 1

    DEVICE REPORT FROM SYNTHES (B)(6) REPORTS AN EVENT AS FOLLOWS: ON (B)(6), 2020, A REMOVAL PROCEDURE WAS PERFORMED TO REMOVE THE SCREWS. DURING THE SCREW REMOVAL, A THIN STRING-LIKE SILVER FOREIGN OBJECT WAS FOUND. THEY TRIED TO FIGURE OUT WHERE THE FOREIGN OBJECT CAME FROM BUT WERE NOT ABLE TO IDENTIFY IT. THE ORIGINAL PROCEDURE OCCURRED ON (B)(6), 2016. THIS REPORT IS FOR A LOCKING SCREW. THIS IS REPORT 4 OF 10 FOR (B)(4).

    Devices

    Seq Brand Generic Product Code Manufacturer Model Lot UDI-DI
    1410255 2.0MM TI MATRIXMANDIBLE LOCKING SCREW SLF-TPNG 12MM PLATE, BONE JEY SYNTHES GMBH 9790653 07611819939776

    Patients

    Seq Age Sex Outcome Treatment
    1 LOCK SCR Ø2 SELF-TAP L12 TAN 1U I/CLIP| LOCK SCR Ø2 SELF-TAP L12 TAN 1U I/CLIP| LOCK SCR Ø2 SELF-TAP L14 TAN 1U I/CLIP| LOCK SCR Ø2 SELF-TAP L16 TAN 1U I/CLIP| LOCK SCR Ø2 SELF-TAP L6 TAN 1U I/CLIP| MATMAND PL STRAIG 6HO T1.5 TI| MATMAND SCR Ø2 SELF-TAP L5 TAN 1U I/CLIP| MATMAND SCR Ø2.4 SELF-TAP L6 TAN 1U I/CL| MATRIXMAND MINI-TENSIONPL NARROW CENTRE