BEUDAMED
    FDA Adverse Event Malfunction Summary report: N

    BLOOD PUMP PU VALVES 15 ML, IN/OUT 9 MM

    MDR report key: 10233480 · Received July 6, 2020

    Report

    Report Number
    3004582654-2020-00029
    Event Type
    Malfunction
    Date Received
    July 6, 2020
    Date of Event
    June 25, 2020
    Report Date
    July 6, 2020
    Manufacturer
    BERLIN HEART GMBH
    Product Code
    DSQ
    UDI-DI
    04260090040157
    PMA / PMN Number
    P160035
    Product Problem
    Yes
    Report Source
    Manufacturer report
    Reporter Location
    GM
    Reporter Occupation
    OTHER HEALTH CARE PROFESSIONAL

    Narratives

    Additional Manufacturer Narrative · 0

    DURING INITIAL VISUAL EXAMINATION OF THE RETURNED BLOOD PUMP, AN AIR CUSHION COULD BE DETECTED BETWEEN THE MEMBRANE LAYERS. FOR FURTHER ANALYSIS THE PUMP WAS DISASSEMBLED AND THE MEMBRANE LAYERS WERE INDIVIDUALLY EXAMINED. A LEAKAGE WAS DETECTED IN THE AIR-SIDE LAYER ALONG THE ROLLING RADIUS OF THE STABILIZATION RING. FURTHERMORE, GRAPHITE AGGLOMERATES WERE FOUND BETWEEN THE MEMBRANES. THE MIDDLE LAYER AND THE BLOOD-SIDE LAYER OF THE TRIPLE LAYER MEMBRANE WERE FOUND TO BE INTACT. THE THICKNESS OF THE DEFECTIVE MEMBRANE LAYER, AND THE ONE ADJACENT WAS RE-MEASURED AT DEFINED POINTS. THE THICKNESS OF THE INDIVIDUAL LAYERS AT ALL DEFINED POINTS AND IN THE AREA AROUND THE LEAKAGE WAS FOUND TO BE WITHIN SPECIFICATION AT THE TIME OF THE RE-MEASUREMENT. THE CAUSE OF THE LEAKAGE IN THE AIR-SIDE LAYER WAS MOST LIKELY AN ABRASION BETWEEN THE MEMBRANE LAYERS. THIS CAUSED INCREASED FRICTION AT SOME POINTS, WHICH FINALLY LED TO THE DEFECT IN THE AIR-SIDE LAYER OF THE TRIPLE-LAYER MEMBRANE. AS A RESULT OF THIS DEFECT, AIR GOT IN BETWEEN THE MEMBRANE LAYERS AND FORMED AN AIR CUSHION, CAUSING THE REDUCED PUMP PERFORMANCE (INCOMPLETE FILLING AND EMPTYING).

    Additional Manufacturer Narrative · 1

    THE EXCOR BLOOD PUMP, S/N (B)(4), WAS IN USE BY THE PATIENT FROM (B)(6) 2020 UNTIL (B)(6) 2020 (175 DAYS). WE HAVE REVIEWED THE PRODUCTION RECORDS OF THE EXCOR BLOOD PUMP, S/N (B)(4). THIS PUMP WAS PRODUCED ACCORDING TO OUR SPECIFICATION. THE BLOOD PUMP IS DESIGNED WITH A TRIPLE LAYER MEMBRANE SEPARATING THE AIR CHAMBER FROM BLOOD CHAMBER FOR SAFETY REASONS. THE ENTIRE MEMBRANE CONSISTS OF AN AIR-SIDE LAYER, A MIDDLE LAYER AND A BLOOD-SIDE LAYER. IN CASE OF DISRUPTION IN ONE OF THE TRIPLE LAYERS, THERE ARE TWO MORE LAYERS THAT WILL MAINTAIN THE INTEGRITY OF THE AIR AND BLOOD CHAMBERS. THE AFFECTED BLOOD PUMP HAS NOT BEEN RETURNED TO THE MANUFACTURER YET. A DETAILED INVESTIGATION REPORT WILL BE PROVIDED AS SOON AS IT BECOMES AVAILABLE.

    Description of Event or Problem · 1

    BERLIN HEART WAS CONTACTED BY THE CLINIC TO REPORT A SUSPECTED MEMBRANE DEFECT IN THE LEFT EXCOR BLOOD PUMP OF A PATIENT SUPPORTED IN THE BVAD CONFIGURATION. THE AFFECTED BLOOD PUMP WAS EXCHANGED IN THE CLINIC BY TRAINED PERSONNEL. THE EXCHANGE WAS PERFORMED WITHOUT COMPLICATIONS AND THE PATIENT IS DOING WELL.

    Devices

    Seq Brand Generic Product Code Manufacturer Model Lot UDI-DI
    701627 BLOOD PUMP PU VALVES 15 ML, IN/OUT 9 MM VENTRICULAR ASSIST DEVICE DSQ BERLIN HEART GMBH P15P-001 04260090040157

    Patients

    Seq Age Sex Outcome Treatment
    1 5 YR