INO ADDITIONAL ADAPTERS
These kits are intended for the delivery and the sampling / monitoring of gases during iNO therapy performed by a SoKINOX / Monnal iNO device. They contain several elements such as flow sensor, fittings and tubes to adapt to the patient circuit between the ventilator and the patient Y-piece (inspiratory) in order to carry the NO gas to the patient. These kits are for single use only.
Basic Information
- Primary DI
- 03760333380992
- Basic UDI-DI Code
- 376033338KIT_ADMIN_INOR3
- Reference
- IN000307
- Device Types
- None provided
- Regulation
- Eu Mdr
- Classification
- Eu Md Class 2a
- Status
- On The Market
Additional Description
iNO Additional adapters: - 2 Flow sensor adapters, 15F/15F - 1 Flow sensor adapter, 22F/22F - 1 Sampling T-connector, 22mm - 1 T-connector luer 15M-15M
Medical Purpose
These kits are intended for the delivery and the sampling / monitoring of gases during iNO therapy performed by a SoKINOX / Monnal iNO device. They contain several elements such as flow sensor, fittings and tubes to adapt to the patient circuit between the ventilator and the patient Y-piece (inspiratory) in order to carry the NO gas to the patient. These kits are for single use only.
CND Nomenclature Codes
| Code | Description |
|---|---|
| Z1203019080 | VARIOUS INSTRUMENTS FOR ANAESTHESIA AND PULMONARY VENTILATION SUPPORT - HARDWARE ACCESSORIES |
Related Devices
The Basic UDI-DI associated with this device has 7 devices in total. Below are some other devices sharing the same Basic UDI-DI.
KIT PATIENT BUNNELL NEXT/ADV
DeviceiNO PATIENT KIT NEXT/ADVANCED
DeviceiNO Patient Kit, Bunnell
DeviceiNO Patient Kit, Sensormedics
DeviceiNO Patient Kit, Low Flow
DeviceSimilar Devices
Other on-the-market devices with the same classification (Eu Md Class 2a) and regulation (EU MDR).